This product is part of a series of two floor lamps we designed, created for home décor. The goal was to make a versatile design, since it can also be used as a pendant lamp, combined with our RippleMesh texture.

What's included • The Dega Lamp with our signature RippleMesh texture, in two sizes. • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • Dega: X: 282.93 / Y: 282.93 / Z: 239.40 • Dega 208: X: 208.31 / Y: 208.31 / Z: 194.40

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Rega Lamp