Wallace the Warthog

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 233x233mm in size. The Max Depth is 4mm and the Actual Depth is 4.1mm. This print uses 9 unique filaments

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Black Transmission Distance PLA+ Esun Dark Blue Transmission Distance: 2 PLA BambuLab Basic Green Transmission Distance: 2 (or Esun Morandi Green) PLA+ Esun Brown Transmission Distance: 1.5 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Blue At layer #14 (1.2mm) swap to Green At layer #16 (1.36mm) swap to Brown At layer #23 (1.92mm) swap to Cyan At layer #25 (2.08mm) swap to Red At layer #27 (2.24mm) swap to Orange At layer #34 (2.8mm) swap to Yellow At layer #44 (3.6mm) swap to Jade White for the rest

Frame not included