This is the statue representing ALFI's grandpa. Open the head of the statue and you will find a button, unscrew it and it will open a hidden chamber in which to hide your secrets! A magnet (max. diameter 10mm and thickness 2mm) can be inserted into the head of the statue to make accessories (such as the hat) magnetic. ALFI accessories can be used with the statue.

OTHER VIDEO & PHOTO If you want to see more videos or photos of this design follow me on my Instagram or TikTok!

COMMERCIAL LICENSE Purchasing or downloading this file does not give you the right to sell physical prints of this design. You can obtain a commercial license for all my designs by signing up to my Thangs.

3D PRINTING SETTINGS ALL PARTS

• Layer height 0.12 mm for a better finish
• No supports
• Back seam is recommended

BASE

• Ironing top surfaces

BASE and TOP HAT with HAIR

• Support

For those who can print with two colors, I recommend these secret settings for supports for the tower (BambuStudio):

• ENABLE SUPPORT: Yes
• TYPE: Normal
• _ STYLE_: Snug
• THRESHOLD ANGLE: 10
• ON BUILD PLATE ONLY: Yes
• REMOVE SMALL OVERHAGS: Yes
• SUPPORT/RAFT BASE: Default
• SUPPORT/RAFT INTERFACE: PETG (Choose PETG if the object is printed in PLA, or choose PLA if the object is printed in PETG.)
• TOP Z DISTANCE: 0
• BOTTOM Z DISTANCE: 0
• BASE PATTERN: Rectillinear
• BASE PATTERN SPACING: 2
• PATTERN ANGLE: 45
• TOP INTERFACE LAYERS: 3
• BOTTOM INTERFACE LAYERS: 3
• INTERFACE PATTERN: Rectillinear Inter...
• TOP INTERFACE SPACING: 0
• NORMAL SUPPORT EXPANSION: 1
• SUPPORT/OBJECT XY DISTANCE: 1
• SUPPORT/OBJECT FIRST LAYER GAP: 1

Using these settings the supports will come off right away without any difficulty, try it to believe! If you need help write me on Instagram