The Malleable Mallard

This Fidget Mallard is designed to printed with no supports. All the joints articulate right off the build plate. Simply Glue the head and beak on. the wings 'flap' and the feet pop out, making it a very fun fidget toy.

Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!

Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface. Use Arachne wall generator for the head for best results.

Assembly Glue the head to the body, and the body to the beak. To get a tight seam for the beak, rotate it upwards slightly while gluing, so that the gap is larger on the underside.

Filaments I Used: Some of these contain affiliate links

Black: Bambu Matte Charcoal

White: Bambu Matte Ivory White

Yellow: Polylite PLA pro Yellow

Green: Polylite PLA Jungle Green

Brown: Bambu Matte Dark brown

Printing Stats Estimated for Bambu A1 Combo

Single Model Time - 8h 55min Filament per model - 123g

Full build Plate (24) Time - 23h 53min Filament per model - 23.25g