Looking for the perfect 3D print for Valentine’s Day? This adorable bee holding a heart is a fantastic choice for gifts or decorations! With its charming details and thoughtful features, this model is sure to bring smiles to everyone who sees it.

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence.

Whether you’re crafting a thoughtful gift, decorating for Valentine’s Day, or making products to sell, this cute little bee is the perfect project to spread some love!

Features:

• Two Variants Included: Includes a version of the bee with wings and one without wings, offering flexibility to match your vision.
• Articulated Design: Some of the bee’s parts are movable, making it interactive and super cute. The knees move, shoulders (if not glued) and elbows move, and head turns. Neck and knees are print in place ball joints and elbows and shoulders are links.
• Eye Options: Use the included 3D-printable eyes or add a polished touch with 12mm glass eyes.
• Heart with a Stand: The heart includes a built-in stand for display, and the bee can also stand on its own, making it versatile for any setting. There are two hearts included - one with depressions for the bee's fingers and one full one without.
• NO AMS REQUIRED: Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces.
• Fit Together Pieces: As this was designed for single color printers, all pieces will either loose or tight fit together. However, glue is required to hold model together. [I recommend Loctite Professional Super Glue for PLA.]
• STL and 3MF Files Included

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. Also includes some points - stinger.

Dimensions at 100% Size [including heart and stand]: Height: Approx 6.083" Width: Approx 3.984" Depth: Approx 3.560"

Dimensions of Bee Only: Height: Approx 5.857" Width: Approx 2.586" Depth: Approx 3.560"

Dimensions Stand and Heart Only: Height: Approx 3.792" Width: Approx 3.512" Depth: Approx 3.512"

PLEASE NOTE: Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA, PLA+, and Transparent PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports - YES
• Support Type - TREE SLIM [Manual Supports need to be added to inside of knee ball joint]
• Threshold Angle - 30 degrees
• Brim - YES - recommended
• Top Z-Distance - .28
• Orientation photos provided

Print Times with settings above:

1. Yellow Plate - 1hr 14min (Includes both body sections for w/wo wings
2. Black Plate - 1hr 15min
3. Wings - 10min
4. Eye Parts - a few minutes and depends on if you combine with other plates