I hope everyone had a wonderful holiday season!

Here's a lovely ACOTAR print that has been rather popular at markets! It only takes about 3.5 hours to print on a Bambu printer and if you use the fancy burnt titanium (or equivalent) filament as the background, it just makes it so much more eye catching!

Pretty easy print overall, and feel free to change up the 'top' surface setting of the background if you don't feel like using octogram spiral (if using the 3MF). You can also replace the Burnt Titanium with something else (black works well!)

If you decide to use the STL instead, of course feel free to use whatever setting you feel like! If you want to resize the print, only change the X and Y dimensions!

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 176x240mm in size You may print at higher layer heights below the Min Depth of 0.6mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.1
• PLA Flashforge Burnt Titanium Transmission Distance: 4
• PLA+ Sunlu Coffee Transmission Distance: 1.8
• PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments

Swap Instructions:

• Start with Black
• At layer #11 (1mm) swap to Burnt Titanium
• At layer #16 (1.4mm) swap to Coffee
• At layer #19 (1.64mm) swap to White for the rest.

Have so much fun!!

Much love!!