Twiddly Toucan- Articulated Fidget Toucan - Keychain - Ludo 3D Printed Flexy Fidget Toy
The Twiddly Toucan
This Fidget Toucan is designed to print in place with no supports. All the joints articulate right off the build plate. Simply glue the beak to the head. I designed the Toucan to have feet that pop out the bottom, making it super fun to play with at your desk.
Keychain Version This model is available with a hole cut for keychains. Key chain
Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!
Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface. Glue the Beak on, I recommend printing the beak and body on separate build plates.
Filaments I Used: Black: Bambu Matte Charcoal White: Bambu Matte Ivory White Orange: Bambu Matte Mandrin Orange Blue: Polymaker Stone Blue
Twiddly Toucan- Articulated Fidget Toucan - Keychain - Ludo 3D Printed Flexy Fidget Toy
Ludo Sheltie - Articulated Fidget dog
Jumping jackalope - Articulated Fidget Jackalope
Chatty Cockatoo - Articulated fidget Cockatoo
Ludo Havanese -Articulated Fidget Dog
Labradoodle - Articulated Fidget Dog
Ludo Pug - Articulated fidget dog
Popsicle Clicker
Buck-Tooth Beaver - Articulated fidget beaver
Ludo Boarder Collie - Articulated Fidget Dog
Ludo Springer Spaniel - Articulated Fidget Dog
Grumpy Goose - Articulated Fidget Goose
.png&w=3840&q=75)
Ludo Chihuahua - Articulated fidget Dog
Pecky Pigeon- Articulated Fidget Pigeon
Icky Iguana - Articulated fidget Iguana
Ludo Jack Russel - Articulated Fidget Dog
Squawking Seagull - Articulated Fidget Seagull
Ludo Pomeranian - Articulated Fidget Dog
Husky - Articualted Fidget Dog
Able Alien - Articulated fidget alien
I really love the look of this model! Is there a way to loosen the feet after printing? I noticed that they are stuck in the model. Looking at the slicer, there seems to be 2 layers that are connected to the body on the right leg(looking from the back of the model, left is looking directly at the model. But the other leg doesn't seem to be connected to the body, not sure why this one is stuck. Did you run into any of these issues?
Hi, Thanks for bringing this to our attention. We will get it fixed. However, for the ones you already have printed you should be able to break the leg free inside by using an exactor knife or other pointy/small tool
Perfect! Yes, thank you! I was able to get them free. Thank you for looking into that!
Got the same issue and it's always the same side that is stuck. Could get is lose with an exactor knife, will try printing the next batch at 110% size.
We’re already working on fixing the issue with the feet and will share an update here as soon as it’s resolved. Thank you so much for your patience, sorry for the hiccup!
Sorry for the wait, this issue has been resolved. You should not have this issue moving forward. Thank you for your patience!