Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 3
Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms 3d model
Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms 3d model
Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms 3d model
Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms 3d model

Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms

Subscribe for access starting at $10 USD
Get access to this model and 825+ more

Another Dan Da Dan art piece.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 128.52x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Blue At layer #8 (0.72mm) swap to Pink

Border Only Colors from here until the end. At layer #19 (1.6mm) swap to Jade White for the rest.


Discussions

Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms

14 downloads · 1 year ago in  and 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 825+ more

More models