Rollable Mimic Dice
140 downloads · 1 year ago · You will need 8-2x8mm magnets and a couple dabs of glue to assemble.
Bambu AMS color files. Does n
You will need 8-2x8mm magnets and a couple dabs of glue to assemble. Bambu AMS color files. Does need supports. this is the full assembly video https://youtube.com/shorts/jRPfyqF3n14?si=qMAZbY1djmLSjeHf
Rollable Mimic Dice
140 downloads · 1 year ago in  andÂ
16oz Dark Insanity Can Cozy Dice Tower
Wolf Blood Potion Bottle Dice Tower With Storage
Carpenter Bee Garden Guardian
Papa and Baby Worm
Wizard Potion Bottle Dice Tower With Storage
Jewel of the Gods Battle Ax
Essence Of The Deep Potion Bottle Dice Tower With Storage
From The Deep 12oz Can Cozy Dice Tower.stl
Fidget D20 dice
D20 Mimic Dice Tower Version 2
King of the beasts 12oz. can cozy dice tower
Dragon Scales Potion Bottle Dice Tower With Storage
Dark Arts Potion Bottle Dice Tower With Storage
Stone Cthulhu Fidget Dice Cup ,Desk planter or Organizer
Twin Phoenix Foldable travel Dice Tower
Jelly Bean Pooping Bunny
Dragon's Blood Potion Bottle Dice Tower With Storage
Dagger Dice Tower Potion Bottle With Storage
Monster Potion Bottle Dice Towers With Storage
Hi printed the model and the tolerances are super tight and the 8x2 magnets don't fit. what settings do you use to print?
You might want to check your flow rates it sounds like you're overextruding. Or you could try just scaling it up a little bit.. I'm not trying to be dismissive but I did test print this across four different printers. So it might be that your machine is out of calibration. What printer are you using so I can better troubleshoot this.
I am using a Kobra 3 combo to print it
I am using a Kobra 3 combo to print it
I am having the same problems as Kogamingnmore. The tolerances are super tight. I can get the mimics together but I can't get them open again.
You might want to try scaling it up a little bit. I would start with the Center Post scale it up a bit until the magnet fits. As you scale it up, the tolerances should get larger. Or it just might be an issue of over Extrusion from your printer. You should be able to correct it with your flow rates.
I actually fixed this by changing the x-y hole contour and compensation in the Precision section within Bambu Studio. My extrusion is fine - other projects seem to print and assemble just fine with tight tolerances.