Simple Angel in Vase Mode - for LED tealight or as tree topper - fast print with wings with infill pattern

If you like it --> press like it :-)

Very fast to print, nice finish and easy to assemble and illuminate. Can be used for decoration on e.g. a shelf, as treetopper or as light.

The body is designed for 0.8mm line width and vase mode.

It is without problems possible to print with a 0.4mm nozzle a line width of 0.6 to 0.8mm. Slightly increase the temperature.

You may have openings at the top. You can get better results if you increase the flow at the higher layers.

You can simply change the height of the angel when you move it in the slicer downwards. With that you can create a group of angels with different height. The print in the pictures is moved 50mm below the printer bed.

I recommend to print the wings in normal mode with zero bottom and top layer and vary the design with the infill pattern. The picture shows 20% gyroid.

License & Usage

• For private use only

Commercial License Option A commercial license is available by joining one of my Crazy3D Commercial Plans Crazy3D Commercial License + 5 Downloads per month https://thangs.com/designer/Crazy3Dde/memberships/6183/period/year Crazy3D Commercial License + 10 Downloads per month https://thangs.com/designer/Crazy3Dde/memberships/6203/period/year . The license is valid only while the membership is active and allows you to sell physical prints of my models available on Thangs. Please check the plan description for full details, conditions, and exceptions.

If you like this model, I would really appreciate a like, comment, or make.

If you enjoy my designs and my work for the community but don’t plan to sell them, you can still support me by:

☕ Buying me a coffee: https://buymeacoffee.com/crazy3d

❤️ Or joining my Crazy3D Supporter Plan - Personal use https://thangs.com/designer/Crazy3Dde/memberships/6205/period/year (donations only – no resale rights included)

Your support helps me continue creating new and exciting models for the community.

Would be happy to see your makes!