Candy Cane skin for the Ringchaku Spinning Fidget Toy!

Printing tips: Print with the flat side down, no supports should be required.

Unfortunately to get color for this print, you have to have a multi-material system. Or of course you can paint it yourself!

For the chain I recommend using a brim with a brim-object gap of 0.15mm for 0.4mm nozzle.

If you use Bambu Studio or OrcaSlicer, handy print project files with painted parts are included!

Assembly: Use pieces 1.75mm filament as alignment pins and glue the two halves together!

If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. Please check out my membership plans! ❤