I have a Philips Senseo Coffee Machine and the Pods are expensive so I got a EcoPad so I can use my own ground coffee. The EcoPad has a spike on the bottom and its difficult to keep it flat and still so I designed this holder and Tamper to fill the EcoPad Quickly and Easily.

Printed In Bambu Lab Basic PLA in white on the x1c. Took about an hour.

Print Settings

Layer height 0.2mm.

Infill 10% gyroid.

5 Bottom layers just for a bit more strength.

Use a brim if you have bed adhesion issues but you shouldn't need it.

Uploaded Step files if anyone wants to make alterations.

If anyone has any suggestions for improvements then feel free to let me know in the comments.

This work is licensed under a Creative Commons (4.0 International License) Attribution