ThunWolf10 followers

Fursuit Wall mount hang - drill-less 3d model

Fursuit Wall mount hang - drill-less

188 downloads · 2 years ago · A hook to mount your fursuit head to the wall! Has enough separation from the wall to ensure (most)

This model is restricted by licensing terms.

View license.

Description

A hook to mount your fursuit head to the wall! Has enough separation from the wall to ensure (most) fursuit head does not get crushed to the wall. Can also be used to hold other masks/costumes, or coats (maybe). The hook is rounded on all edges to avoid damaging the fursuit

Important! Print settings:

0.16mm layer height
5 perimeters minimum (to ensure sufficient strength)
I used 5% infill, feel free to change this to your liking
Print from the base upwards, an ender 3 should be able to print the 30º slope without supports

Note: this is designed to use drill-free adhesive hooks to avoid damaging walls, useful for renters like myself, the pads I used are like these (check the dimensions!): https://www.amazon.es/Auptiz-Autoadhesivos-Transparentes-adhesivos-impermeable/dp/B0B3J4TMP3/ref=sr_1_40 https://www.amazon.com/Transparent-Reusable-Adhesive-Waterproof-Oilproof/dp/B0919SV15Q/ref=sr_1_26

Tags:

Discussions

noctusowl55 months ago

I want to sell these on my etsy shop. Im somewhat new to selling 3d prints and I think this would be good to sell for fursuiters. Im willing to give credit ofcourse.

gamerbrosxxigigi1 year ago

I noticied a little issue with it sheering off with a 20% infill too. maybe with heavyier heads they need more supports on the angles

ThunWolf1 year ago

Did you print with 5 perimeters? Usually sliciers come preset with only 3 perimeters, and that is not enough to be strong enough (the infill helps wth strength too, but not as much)

pluhnog1 year ago

Awesome print Bro look forward to seeing what cool things you can make in future