The fluidity of life - Art depicting the core in change - Hueforge art
Art piece 2 of the 4 going up this evening. Another more philosophical one and a cool design with the paints.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #11 (0.96mm) swap to Gray At layer #18 (1.52mm) swap to Beige for the rest.























You are absolutely correct. thank you for saying something. I have fixed the writeup here.
This seems to have the wrong colors listed here? There are different colors listed in slicer like Light Grey, Dark Grey, Beige, and Black.