This is the Lion Emerging- Gryffindor Inspired Book Nook from Harry Potter! This is the easiest print and requires the least amount of filament of all my book nooks to date! The lion prints in one piece, and I have included two sizes of book nooks- A shallow box, and a deep box. I have also included the 3mf files if you use Bambu Studio. Below are my suggested print settings if you do not use Bambu Studio. Also, big tip here, if you ever struggle to remove supports- USE A HEAT GUN. A hairdryer even works. This will help prevent cracking and small pieces from breaking off. I use a heat gun daily to ensure my supports peel right off. Just don't melt your print ;)

As always, happy printing and tag me in your post and I will try and share it with my followers!

3D printing settings Lion Body- 3 walls, 10% gyroid infill, normal supports (avoid tree supports for this one because they will wrap around the claws of the lion and make support removal difficult)

Book Nook- 3 Walls, 20% lightning infill

Book Nook Shallow- 3 Walls, 5% gyroid infill