SHAPAPOUME | Tissue Napkin Holder, scalable & fast-printing

Pardon the name. My kids made it up and insisted that I use it.

Anyways, it's a fast-printing and fully scalable napkin holder.

Just scale it at will. Pick the wall thickness (how many perimeter walls you want). Set infill to 0%, cancel the top and bottom faces. And print!

DIMENSIONS | L175 mm x W 105 mm x H 160 mm

PRINTING | ~2.5h

3D PRINT SETTINGS The napkin holder prints sideways. (the STL files is already oriented properly) No need for supports. You can use a brim if you use thin walls.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.

Layer height: 0.2 or 0.3mm/layer (the ones in the pictures were printed in 0.28mm/layer) Wall line count: 4 or more (4 walls on pictures, strong enough) Infill: 0% Top layers / top shell layers: 0 (to cancel top face) Bottom layers: 0 (to cancel bottom face) Build adhesion type: 5mm brim Supports: None