Magnetic sweets for your fridge!

Haribo Pico Balla are very delicious. Now you can have them in a wide color variety on your fridge or magnetic board. The magnets easily press in the in the printed parts.

Additional hardware: 8x3mm magnets

Print settings: MMU/AMS recommended! Select the desired color for each part. 0.2mm layer height 0.4mm line width (also 1st layer) 2 walls 10%grid If you have problems with tolerances you can use X-Y hole compensation (0.05/0.1)

Filament: Choose colourful filaments :)