tracking pixel
Marcel R

Pico Balla magnets for fridge/magnetic board

by
Geoshape
Follow
Follow
Remix Model
Geoshape
Geoshape
|
Image 1 of 4
Pico Balla magnets for fridge/magnetic board 3d model
Geoshape
Geoshape
|
Image 1 of 4
Pico Balla magnets for fridge/magnetic board 3d model
2D
3D
Makes
Pico Balla magnets for fridge/magnetic board 3d model
Pico Balla magnets for fridge/magnetic board 3d model
Pico Balla magnets for fridge/magnetic board 3d model
Pico Balla magnets for fridge/magnetic board 3d model

Magnetic sweets for your fridge!

Haribo Pico Balla are very delicious. Now you can have them in a wide color variety on your fridge or magnetic board. The magnets easily press in the in the printed parts.

Additional hardware: 8x3mm magnets

Print settings: MMU/AMS recommended! Select the desired color for each part. 0.2mm layer height 0.4mm line width (also 1st layer) 2 walls 10%grid If you have problems with tolerances you can use X-Y hole compensation (0.05/0.1)

Filament: Choose colourful filaments :)


1 Likes1 DownloadsOctober 4, 2024


1 Likes1 DownloadsOctober 4, 2024