_Rivet_Lock_v1.png&w=256&q=75)
Multiboard Remix | 8 mm - Dual Offset Snap (DS Part A) Rivet Lock Mount
258 downloads · 2 years ago · Remix of 8 mm - Dual Offset Snap (DS Part A) to interface with Rivet Lock commonly seen on "industri
Remix of 8 mm - Dual Offset Snap (DS Part A) to interface with Rivet Lock commonly seen on "industrial" style consumer shelving. I remixed it as I am building my own Multiboard tile board and wanted to connect it directly to some industrial shelving I already had (https://www.bunnings.com.au/montgomery-1830-x-910-x-410mm-5-tier-shelving-unit_p2760578). Note: This is not perfect I quickly put it together and it works well enough for my purposes. See how you go with it.
Multiboard Remix | 8 mm - Dual Offset Snap (DS Part A) Rivet Lock Mount
258 downloads · 2 years ago in  andÂ
4 mm Offset, Command Strip Mount, Cross Quad Offset - DS Part A for Maultiboard
8 mm, Command Strip Dual T Mounting Offset Snap - DS Part A
Remix of 8 mm, T Mounting Offset Snap - DS Part A - Slatwall Adapter
Remix of 8 mm, Cross Quad Offset Snap - DS Part A
_-_Part_1.png&w=3840&q=75)
Remix of 8 mm - Quad Offset Snaps (DS Part A Single Piece)
.png&w=3840&q=75)
Remix of 8 mm - Dual Offset Snaps (DS Part A) - SOLID STEP AND Fusion 360
Offset Snap (DS Part A) modified for use on US General tool wall.
.png&w=3840&q=75)
12.5 mm - Offset Snap (DS Part A)
%2520-%2520Part%25201.png&w=3840&q=75)
12.5 mm - Quad Offset Snaps (DS Part A)
.png&w=3840&q=75)
12.5 mm - Dual Offset Snaps (DS Part A)
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Offset Snap (DS Part A) - x4 Stack
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Quad Offset Snap (DS Part A) - x4 Stack
6.25 mm - Dual Offset Snap (DS Part A) - x4 Stack
6.25 mm - Offset Snap (DS Part A) - x4 Stack
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Dual Offset Snap (DS Part A) - x4 Stack
Over-Door 12.5 mm Quad Offset Snaps (DS Part A)
12.5 mm - Dual Offset Snap (DS Part A) Community Upload
12.5 mm - Quad Offset Snaps (DS Part A) Community Upload
12.5 mm - Offset Snap (DS Part A) Community Upload
omg thank you so much ive been looking for this and the times ive attemped to make it i get lost in software im still learning cad
This what I am looking for except that my key holes on my shelving unit are a little further apart -- any chance you have idea how to space them out a little more?