1x1 CU - USB-A Holder - Multibin Top
Multibin Top for holding USB-A memory sticks. Multibin Tops click onto Multibin Inserts or can be attached to Shells using Top Click Rims.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
1x1 CU - USB-A Holder - Multibin Top
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
The tolerance of the USB 'ports' is really loose and USB devices don't feel secure in it. Fine for vertical orientation but if trying to mount so the top is facing out horizontally, should be improved somehow. I might try lining the inner walls of the 'ports' with felt or something for now.
(sliced in Bambu Studio and printed on a Bambu Labs P1P with Matte PLA)
maybe I'm Missing Something, It won't fit on the top, its too small and falls in
It's meant to fit the inserts. If you want to attach to a shell you can use Top Click Rims as an adapter => https://thangs.com/search/%22MG248%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=grid