Seen on Twitter and Facebook - this Frog needs 8 colors (pick whatever black you want) and results in a colorful frog with wonderful coloring.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA Kingroon Red Transmission Distance: 4.2 PLA PolyLite Wine Red Transmission Distance: 1 PLA Jessie Premium Yellow Bird Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA PolyLite Azure Blue Transmission Distance: 3 PLA Prusament Simply Green Transmission Distance: 1.8 This print uses 8 unique filaments

Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Dark Blue At layer #13 (0.64mm) swap to Red At layer #17 (0.8mm) swap to Wine Red At layer #21 (0.96mm) swap to Yellow Bird At layer #28 (1.24mm) swap to Ivory White At layer #34 (1.48mm) swap to Azure Blue At layer #41 (1.76mm) swap to Dark Blue At layer #44 (1.88mm) swap to Black At layer #45 (1.92mm) swap to Simply Green At layer #48 (2.04mm) swap to Yellow Bird At layer #56 (2.36mm) swap to Ivory White for the rest.