A HueForge Depth illusion of a stone wall or floor. You've seen it on Reddit/BambuLab Facebook - now see it here.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Black filament can be substituted with nearly any black. White can be Bambu Jade White, Polymaker, IIID Max or any other low TD White. The Vanilla Cream can be subbed for Bambu Tough White or IIID Max Vintage Rose, SUNLU Meta White should work too. Most DARK gray should work as well.
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ IIID Max Night Gray Transmission Distance: 1 PLA Bambu Lab Gray Blue Transmission Distance: 2 PLA+ IIID Max Vanilla Cream Transmission Distance: 10 PLA PolyLite White Transmission Distance: 5
Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Night Gray At layer #13 (0.64mm) swap to Gray Blue At layer #19 (0.88mm) swap to Vanilla Cream At layer #23 (1.04mm) swap to White for the rest.
If you have a BambuLabs printer, the Stone_Tile_Front_200x200_Bambu.3mf contains a working 0.04mm profile for a 0.4mm nozzle. It is set for the X1C but is confirmed to work on the P1P or P1S. It also has the model split by color for easy adjustment and a Height Range Modifier making the first three layers 0.16mm for faster printing. If you have a Palette or other Multi-material system, the Stone_Tile_Front_200xx200.3mf has the model split into STLs by color but without color assigned, a Height Range modifier, or a functional print profile. You need a 0.04mm profile for your printer.