This is Malcolm the Mammoth. A deep textured, 5mm thic print, using 11 colours. The print is is 233mm x 233mm. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Esun Dark Blue Transmission Distance: 2 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Charcoal Black At layer #17 (1.44mm) swap to Dark Blue At layer #18 (1.52mm) swap to Green At layer #21 (1.76mm) swap to Brown At layer #23 (1.92mm) swap to Yellow At layer #24 (2mm) swap to Grey At layer #29 (2.4mm) swap to Orange At layer #34 (2.8mm) swap to Latte Brown At layer #42 (3.44mm) swap to Bone White At layer #49 (4mm) swap to Jade White for the rest.

Frame not included in this downloaded