.png&w=256&q=75)
1 LU Bin Fit - Bin-To-Bin Clicking Lite Rail - (1.5 MU Rail)
Use this part to connect Multibins to other Multibins. Insert it from the bottom of the Bin and click it into place (or from the top if you have Full Rail Bins).
This version is 45 mm and fits a 1 cell heigh Bin.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
1 LU Bin Fit - Bin-To-Bin Clicking Lite Rail - (1.5 MU Rail)
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
The "1 CU - Bin-To-Bin Rail Click Connector" was to loose in it's rail so the bin would wigle out of the rail connector. Increasing the width of the rail with 2% made it sturdy.
Bambu Labs H2D and X1C, BL Petg HF 3 wall, 15% infill, 0.2mm layer, 0.4 nozzle
Why is the printing orientation not flat on the board as for the larger rails? Any reason?
Bit of feedback for these bin to bin rails. For the 1H but I've noticed it with the longer ones, they are easy to pop out of the side of the bin rail. MORE so for the 1H and 0.5H due to the smaller bins able to apply more torsion force if they don't stay aligned say if you're taking them off the wall or moving them as a group.
I did do multiple test prints ensuring compliance with the 3 wall, 15% infill, 0.2mm layer, 0.4 nozzle, and 3 different spools of PLA and same result.