_-_Medium_Command_Strip_Mount.png&w=256&q=75)
6.25 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
This is a "Medium" Command Strip Mount that works best with 3M Medium Picture Hanging Command Strips and creates a 6.25mm offset from the surface.
If your Tiles are smaller than a 6x6, then use the Small Command Strip Mounts.
This is a "Part A" piece and attaches to four Part B Snaps.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use yourprinter'ss default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
6.25 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
Probably want to update this description to reflect the 6.25 mm change
Looking at the recess in the back of these, it looks like entire the command strip, including the pull tab, would be completely covered by the mount. How would you get to the pull tab of the command strip to pull and remove them?
The picture hanging Command Strips are two-part Velcro, so to remove them you would pull the grid off the wall separating the Velcro, and then you have access to the tab.