Titan Forge
Titan Forge8.8K followers
Titan Forge
Titan Forge
|
Image 1 of 2
Owlbear - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers 3d model
Titan Forge
Titan Forge
|
Image 1 of 2
Owlbear - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers 3d model
Owlbear - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers 3d model
Owlbear - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers 3d model

Owlbear - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

This model is restricted by licensing terms. 

This model is a part of the free Mortal Enemies collection on Thangs! Download and print it now to check out the amazing details, artistic value, free base pack of all sizes, and a convenient pre-supported version - all guaranteed by Titan Forge.

Mortal Enemies is an ever-growing range of monsters that you can use for your tabletop RPG encounters. These miniatures will make every battle a memorable experience and feature many common and uncommon foes. You can find the full range on the Marketplace or by joining our Membership!

Elevate your next RPG campaign with amazing monster miniatures!

License: For the first time ever, Titan Forge has opened a Merchant Tier, exclusively on Thangs. Join the Merchant-level membership and expand your offer of physical miniatures with remarkable Titan Forge models. All minis with ‘Free’ and ‘Merch’ tags, including this one, are included in the Merchant License!

Community Makes (5)
Make by user
Filament: Matterhackers brown, tan and black.

Printed with 40% lightning infill.

32mm file scaled up to 250%
This impressive model came out really great!
With which software has the presupported version been supported?
Thanks for sharing! :)
Great work
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. 

It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base.
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you!
Make by user
Filament: Matterhackers brown, tan and black.

Printed with 40% lightning infill.

32mm file scaled up to 250%
This impressive model came out really great!
With which software has the presupported version been supported?
Thanks for sharing! :)
Great work
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. 

It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base.
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you!


Community Makes (5)
Make by user
Filament: Matterhackers brown, tan and black.

Printed with 40% lightning infill.

32mm file scaled up to 250%
This impressive model came out really great!
With which software has the presupported version been supported?
Thanks for sharing! :)
Great work
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. 

It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base.
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you!
Make by user
Filament: Matterhackers brown, tan and black.

Printed with 40% lightning infill.

32mm file scaled up to 250%
This impressive model came out really great!
With which software has the presupported version been supported?
Thanks for sharing! :)
Great work
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. 

It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base.
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you!

Discussions
Christopher G
Filament: Matterhackers brown, tan and black. Printed with 40% lightning infill. 32mm file scaled up to 250%
Filament: Matterhackers brown, tan and black.

Printed with 40% lightning infill.

32mm file scaled up to 250% 3d model
 3d model
 3d model
PrinterBambu Lab A1
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.16 mm
Infill density40 %
3d_printer_shack
 3d model
Etienne M
captainmaumau
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you!
My first ever mini! I imported the Owlbear and the rock in Orcaslicer and merged them to make one print. Printed at 0.12mm layer height with a 0.4mm nozzle and the result is astonishing!! Amazing model thank you! 3d model
 3d model
 3d model
PrinterBambu Lab A1
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA+
Layer height0.12 mm
Infill density15 %
Michael G
mikejr83

Might have to snag a newer FDM printer if I can get results like that. I just got my first resin printer since I wanted better resolution. Yours came out great. How long did that print take?

Michael G
mikejr83
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base.
If I'm honest, I'm a bit proud of how this model came out. TF put together a very nicely detailed model. The included rock made basing and posing the model much easier. I pushed myself to work on layering techniques. I feel I did a good job on the body. By the time I got to the wings I was a bit burned out. In hindsight, I should have stopped for the evening and came back the next day. I spent about 4 hours in total on this guy. The owlbear was printed on an Elegoo Mars 5 Ultra in a combination of gray resins that I had available; probably a mix of Elegoo ABS-like and 8K. 

It is painted with Vallejo model and game color paints. No washes or shades were used on the figure. I applied Citadel Athonian Camoshade to the rock for definition and a moss-weathered look. The base was covered in a Citadel Agrellan Earth Technical paint and covered with Citadel Mantis Warriors Green Contrast paint. I added some grass tufts I picked up from the local gaming shop to complete the base. 3d model
 3d model
 3d model
 3d model
 3d model
PrinterElegoo Mars 4 Ultra
MaterialStandard
Layer height0.05 mm
Marius F
Kynip
This impressive model came out really great! With which software has the presupported version been supported? Thanks for sharing! :) Great work
This impressive model came out really great!
With which software has the presupported version been supported?
Thanks for sharing! :)
Great work 3d model
PrinterAnycubic Photon Mono 5S
Layer height0.05 mm
SupportsGrid

Owlbear - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

5.7K downloads · 2 years ago in  and 
Titan Forge
Titan Forge8.8K followers
This model is restricted by licensing terms.