Sunset Crown Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

This Model is 233x233mm in size. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 4.5mm and the Actual Depth is 4.6mm

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used:** PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Green Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Charcoal Black At layer #13 (1.12mm) swap to Blue At layer #15 (1.28mm) swap to Green At layer #19 (1.6mm) swap to Cement Gray At layer #21 (1.76mm) swap to Red At layer #22 (1.84mm) swap to Grey At layer #32 (2.64mm) swap to Light Gray At layer #40 (3.28mm) swap to Orange At layer #47 (3.84mm) swap to Bone White At layer #48 (3.92mm) swap to Yellow At layer #50 (4.08mm) swap to Jade White for the rest.

NOTE - Picture frame is not included in this download.