This tray has a wood grain appearance and is has Oyster mushrooms sprouting from all sides.

It comes with 3 brackets, one for an ikea skadis pegboard, one is for a standard pegboard and the other screws into the wall.

This is meant for light use, not for heavy objects.

For more accessories that go with my BrickBrack mounting system including a mini pegboard, check out my BrickBrack starter pack listing.

Installation is super easy, just mount the chosen bracket and slide the shelf on. If you are mounting the wall bracket I would strongly recommend either screwing into a stud or using wall anchors.

I would recommend tree supports at 70% touching buildplate. >25% infill for the shelf.

For the brackets I would lay them flat side down and print without support with >50% infill.