I am very much #TeamTifa for Cloud, so this print was a no brainer.

This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps.

The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA+ Overture Dark Blue Transmission Distance: 4
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #20 (0.96mm) swap to Dark Blue
• At layer #23 (1.08mm) swap to Teal
• At layer #30 (1.36mm) swap to Jade White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!