Mojave, desk lamp.

263 downloads · 2 years ago · Designed by us, 3D printed by you. This is Mojave, a desk lamp. A PDF with 3D printing settings is

Description

This is Mojave, a desk lamp.

A PDF with 3D printing settings is included.

Tags:

Community Makes (1)

I tried to print following your instructions but the lampshade has these holes between some layers. I noticed this in the slicer but I thought I'd test it to see if it would really be like that. Do you have any idea how to fix this? I don't think this is really what the lampshade should look like, right? I tried increasing the layer thickness to 0.8 but the problem still occurred.

Community Makes (1)

Discussions

datdreamco2 years ago

What sort of lighting are you using in these tall, skinny lights?

nitrodude1501 year ago

Also curious about what Lightbulb socket you used? Thanks.

Side note: Printed on almost stock 0.2mm profile in vasemode on BambuX1C and it came out perfect!

renatocollinetti9602 years ago

I tried to print following your instructions but the lampshade has these holes between some layers. I noticed this in the slicer but I thought I'd test it to see if it would really be like that. Do you have any idea how to fix this? I don't think this is really what the lampshade should look like, right? I tried increasing the layer thickness to 0.8 but the problem still occurred.

MaterialPLA

datdreamco2 years ago

I'm not an expert and I don't use vase mode very often but this kinda look like poor layer adhesion/shifting. I don't have any info about your printer/settings but you could always try to kick up the temp by 10C and see if that helps?