This is my engine can cooler that went viral on Tiktok with millions of views:

https://www.tiktok.com/@ik3digital/video/7230681651859246338

This is the super bundle of my beautiful engine motor coolers version 2. You get the V4, V6, V8 and V8 split expandable to V12, V16, V20 etc. engine blocks to hold and cool regular sized (66mm diameter) and mini cans (53mm in diameter).

You can also scale the files for the regular sized cans to 89.5% and it will fit 58.5mm diameter bottles / cans.

Note that some people prefer printing the engine can coolers at 102% as at 100% the cans might be too tightly.

As seen on Tiktok:

https://www.tiktok.com/@ik3digital/video/7234372832636062978 https://www.tiktok.com/@ik3digital/video/7238822377319107841 https://www.tiktok.com/@ik3digital/video/7232617075422940417

Instructions videos:

https://www.tiktok.com/@ik3digital/video/7234322991276952834 https://www.tiktok.com/@ik3digital/video/7236666918222974209

All the 3 version will fit most printers, even the V8 as I have added a split version. Check measurements for each file below.

You will find all of the files on the "ZIP" file included as an attachement.

Files included:

V4 FILES:

For mini cans (53mm dia):

-Measurements: 183x212mm -V6 Engine block + handle + lid -V6 Logo for the right and left side

For regular sized cans (66mm dia):

Measurements: 217x147mm -V6 Engine block + handle + lid -V6 Logo for the right and left side

V6 FILES:

For mini cans (53mm dia):

-Three versions have been added: Regular size: 232x212mm / Smaller size: 216x212mm / Prusa version: 232x208mm -V6 Engine block + handle + lid regular size -V6 Engine block + handle + lid small size -V6 Logo for the right and left side -"Extra: Piston coaster koozie"

For regular sized cans (66mm dia):

-Two versions have been added: Small version: 217x216mm / Prusa version: 217 x 209 -V6 Engine block + handle + lid regular size -V6 Engine block + handle + lid small size -V6 Logo for the right and left side -"Extra: Piston covers"

V8 FILES:

For mini cans (53mm dia):

-Includes 2 versions: One piece: 216x301mm / Split Version: 153x217mm -V8 Engine block + handle + lid -V8 Logo for the right and left side

For regular sized cans (66mm dia):

-Includes 2 versions: One piece :217x285mm / Split version: 153x217mm -Also, there are 2 versions for the split version, one with more allowance (Recommended to print this one first) and a file that fits more tight. -V8 Engine block + handle + lid for one piece version -V8 Engine block + handle + lid for split version -V8 Logo for the right and left side -Valve covers in one piece and split for the split version.

V12 + V16 + FILES:

This is a split version like the V8, so same measurements, but you can make the holder as big as you want, I have included V12 and V16 logos. It also includes a new handle that fits with old models too!

EXTRAS FOLDER:

You will find:

-The logo piece but clean, so you can personalize it. -Can koozies that fits on the mini cans versions. (I could not make this work on the regular can versions, there is not enough gap between the cans) -Valve covers for the V6 version. Including a clean one, a powered by Ford and a powered by Ram versions. -Valve covers for the V8 version split and in one single piece.

Use it with your favorite drinks, top up with ice and enjoy!

It's a really cool gift too for car lovers, mechanics, etc.

"All of my models are for personal use only, unless you are an active subscriber with a commercial license."

Happy printing!

3D PRINTING SETTINGS:

-Supports: Most printers won't need any supports, except for the V8-V12 split versions as per pictures. -Minimum infill 15% rectilinear. -Minimum walls 2, but I recommend to use 3 if possible and 2 walls at least. -Materials. I have printed it with PLA+ but use PETG if possible, it will last longer, specially on the heat. -Layer height: 0.2mm