3D P

Mushroom Twisty Fidget

by
3DPrinty
Follow
Follow
Remix Model
3DPrinty
3DPrinty
|
Image 1 of 2
Mushroom Twisty Fidget 3d model
3DPrinty
3DPrinty
|
Image 1 of 2
Mushroom Twisty Fidget 3d model
2D
3D
Makes
Mushroom Twisty Fidget 3d model
Mushroom Twisty Fidget 3d model
This model is restricted by licensing terms. 

A small twisty magnetic fidget in fungi form.

Customization

Core Options

  • Default
  • Keychain - Includes a hole for a keychain ring. Glue is recommended if using this as a keychain fidget.

Effect Options

  • Click - The top and bottom halves of the fidget clap for a sharp click sound
  • Rattle - Loose magnets rattle they jump between attract and repel pairs

Magnet Options

  • 6x3mm magnets - Strongest force
  • 3x3mm magnets - More click spots

More Customization

Printing

  • Designed for 0.2mm layer heights
  • All parts can be printed without supports
  • Pause the print to embed magnets in the base - Make sure magnets are oriented so that both sides of the fidgets will pull together.
  • Optional: when printing the 3x3mm version, alternate magnet orientation between attract and repel for fewer click spots and a stronger snap.

Assembly

  • Test screwing the top and bottom core parts together to make sure they fit well. You may need to wear them in a little if they are too tight.
  • If the core parts are too loose, you may need to add glue during final assembly. Keeping them unglued is recommended so you can reconfigure your fidget in the future.
  • Glue magnets into the mushroom top.
  • Lock the two sides of the fidget together with the core.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Mushroom Twisty Fidget" (https://3dprinty.xyz/project/126) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/)


36 Likes81 DownloadsJuly 15, 2024
1


36 Likes81 DownloadsJuly 15, 2024
This model is restricted by licensing terms.