neanderthal wall art caveman wall decor

Neanderthal Wall Decor: Dive back in time with this striking Neanderthal design. Representing our ancient cousins and a significant chapter in human evolution, this piece serves as a fascinating conversation starter. Great for history enthusiasts, anthropology buffs, or anyone looking to add a touch of prehistoric intrigue to their space. 🌍🔥

neanderthal detail.stl

Stylized Stone Reaper Mask -"Grim Reaper" (Sculptober Day 21)

StylizedStone-GrimReaper.stl

Hot Air Balloon Tealight Holder

Basket and Balloon Frame.3mf

Chimera Mask -"Chimera" (Sculptober Day 20)

ChimeraMask.stl

Tardis in Space - Hueforge Hybrid Print

A wibbly wobbly timey wimey model for all the Whovians out here! 

 

This is another Hueforge Hybrid print, where the Tardis ‘pops out’ of the print for a little personality. This print combines Hueforge filament painting methods with traditional 3D printing to create a lovely pop art style print. 

 

**Note: **If you are using the 3MF for one click printing, all settings will have been applied to the model. I used 5 filaments for this on one AMS and swapped one spool out of the AMS when the colour was finished printing for the 5th colour. 

 
**Note 2:** This print also has steep overhangs with no supports. If you're not confident in your printer handling supports with my 3MF file settings, do not use the one-click printing function and import the 3MF file into your slicer and adjust the settings for the ‘Tardis_Export3.STL’ part of the assembly to suit your own supports/overhang settings. 

 

If you are not using the one-click 3MF, the print instructions and recommendations are as follows:

1. This printed without supports, but I enabled slow down for overhangs. This print DOES require your printer / filament to be dialled in to be able to print the overhangs for the Tardis effectively. If you're not confident, I would enable supports. You would not be able to see it or remove it as the supports should only be applied to areas inside the Tardis. 
2. I used a layer height modifier to modify the layer height specific to the Tardis (2.04mm - 33mm) to increase it to 0.16 to speed up the print.
3. I also modified the infill for the the Tardis and the ‘Generic Cube’ to only print at 10% with 4 walls and 4 top and bottom surfaces. 
4. Since this print re-uses the Blue and the Black, if you are using only 1 AMS, I suggest swapping out Slot 3 (should be orange) for the white when you are swapping the colours out. 
5. My recommendation is to have Black, Blue, Orange, Yellow in Slots 1,2,3, and 4 in the AMS, and then swap the orange for white when the orange is done printing. 
6. If you want to use a different colour for the Tardis, then you can swap out the Blue accordingly

**Filament Instructions**
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Polymaker Starlight Neptune (Blue) Transmission Distance: 1.8
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D  Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At layer #8 (0.76mm) swap to Starlight Neptune (Blue)
- At layer #9 (0.84mm) swap to Orange
- At layer #15 (1.32mm) swap to Lemon Yellow
- At layer #17 (1.48mm) swap to White

- At layer #24 (2.04mm) swap to Black

- At layer #27 (2.52mm) swap to Starlight Neptune (for the Tardis!)

Tall Wavy Vase

Tall Wavy Vase.stl

Sky Mask -"Celestial" (Sculptober Day 18)

SkyMask.stl

Un vase

this model is for personal use only, if you want to sell my designs please take a look at my patreon: https://www.patreon.com/pressprint



Textured Vase

Vase 1 shell.stl

Jack Skellington Pop Out Print - Hueforge Hybrid

This unique print-in-place Jack Skellington piece utilises a hybrid printing method that combines Hueforge filament painting and a traditional 3D print model. Jack's head sticks out of the print, giving it a little bit of a personality! 

 

**Important for this print:**  Black is repeated just before the head is printed. If you only have one AMS, I suggest leaving black in Slot 1 and removing AMS slot 2 once its finished printing to replace it with the colour for the head (if using something other than white).  If you are using white, you do not need to remove and replace anything! Just assign the white to the slot your white filament is in. 

The included 3MF has all the settings already applied if you are using the profile attached, but if you are downloading the raw files and using your own print profile, please follow the instructions below.
 

**Print Instructions**

1. The print swaps filaments 5 times, with the final time being the colour of Jack's head that ‘pops out’ from the print. In my print, I used a 5th colour (Glow in the Dark), but you can use what ever colour you want, or even reuse the white. 
2. I printed with supports for the head, but depending on your printer, you may get away with not having supports. I have altered the head to be printed with 5% infill.
3. I printed this file with adaptive layer heights for the head to speed things up (0.2 for the base of the head and 0.04 towards the top of the head). This should be reflected in the 3MF file. You can certainly do this, or use your own settings as well.
4. Post processing includes removing supports for the head, through the holes for the eyes. The tree supports that I used with my settings were fairly easy to remove, however if you are worried, please feel free to use your own support settings to ensure ease of clean-up and removal!  

**Filament Swaps**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Sunlu Red Transmission Distance: 6
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8
- PLA Overture Glow in the Dark Transmission Distance: 8 (this is your head colour!)

**Swap Instructions:**
- Start with Black
- At 1.04mm swap to Red
- At 1.2mm swap to Teal
- At 1.36mm swap to White 
- At 2.08mm swap to Black (this is a repeat colour!)
- At 2.92 swap to Glow in the Dark for the rest.  (Head Colour)

This print uses a model of [Jack's head](https://www.thingiverse.com/thing:1787394) created by Thingiverse user [vmatthews](https://www.thingiverse.com/vmatthews/designs.

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

Pumpkin Skull 2.0

Pumpkin Skull 2.0_Full.stl

Pumpkin Skull 2.0 (Hollowed)

Pumpkin Skull 2.0 (Hollowed)_Full.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Skele-Spine_v2_Tight.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Skele-Spine_v2_Loose.stl

Reaper Cloak

Don't fear... Accessorize! 

While this ghostly garb might have others trembling in terror, your old bones can stride with spooky style in this long flowing fabric of fright.

Use this Reaper Cloak as decoration on its own or pair with the Skele-Spine Snap-Flex Articulated Fidget Toy for the ultimate spectral ensemble!

This Reaper Cloak is an accessory for the Skele-Spine (the fifth creation in a series of Snap-Flex models by Mimetics 3D), and it's available for free for a limited time.

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale to fit the Skele-Spine.  Shrinking may also result in thin walls.

Digital Store
Decor

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

View 17 new models

Stylized Stone Reaper Mask -"Grim Reaper" (Sculptober Day 21)

Hot Air Balloon Tealight Holder

Chimera Mask -"Chimera" (Sculptober Day 20)

Tardis in Space - Hueforge Hybrid Print

Tall Wavy Vase

Sky Mask -"Celestial" (Sculptober Day 18)

Un vase

Textured Vase

Jack Skellington Pop Out Print - Hueforge Hybrid

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

Pumpkin Skull 2.0

Pumpkin Skull 2.0 (Hollowed)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Reaper Cloak

spiral vase

Cat on a Pumpkin (Halloween Version)

Donut Straw Topper

Digital StoreDecor

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

View 17 new models

Stylized Stone Reaper Mask -"Grim Reaper" (Sculptober Day 21)

Hot Air Balloon Tealight Holder

Chimera Mask -"Chimera" (Sculptober Day 20)

Tardis in Space - Hueforge Hybrid Print

Tall Wavy Vase

Sky Mask -"Celestial" (Sculptober Day 18)

Un vase

Textured Vase

Jack Skellington Pop Out Print - Hueforge Hybrid

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

Pumpkin Skull 2.0

Pumpkin Skull 2.0 (Hollowed)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Reaper Cloak

spiral vase

Cat on a Pumpkin (Halloween Version)

Donut Straw Topper

Digital Store
Decor