| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

These new GEN2 Part Drawers feature **3D printable swappable labels** for each storage section. My goal was to make a label that was fairly easy to install, but would also snap in place, and I couldn't be happier with how it turned out!
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [STANDARD length](https://www.jerrari3d.com/gen2-modular-system/standard). 

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)


• 3D Print labels - The label is either available in in STL format or setup as a template in PrusaSlicer and Bambu Studio. 

**PrusaSlicer** - Add text the top surface by right clicking the label in the list on the right (make sure your in Advanced mode) Select “Add part > Text”
 
The emboss tool will show up on the left side of your screen where you can edit your text settings

MMU Printers: Change the color for your text and print

Single Color Printers: Slice the label model, on the layer slider that appears vertically on the screen, drag it down until you find the layer where the text begans printing, click the “+” to add a color change. This will allow you to swap filament colors and print the text in a different color.

**Bambu Studio** - With your label part select, select the Text tool at the top of your screen
 
AMS Printers: Change the color for your text and print

Single Color Printers: Slice the label model, on the layer slider that appears vertically on the screen, drag it down until you find the layer where the text begins printing, right-click the “+” to add a pause. This will allow you to swap filament colors and print the text in a different color.

GEN2 2x0.5 Parts Drawer V2 - 15s - STANDARD.3mf

GEN2 Parts Drawer - 185-2W-05H.stl

185-2W-05H Case.stl

Magnet Insert - 6x2mm.stl

Magnet Insert - 10x2mm.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 270 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.


This listing includes all **18 size variations** of the 270 Decor Drawer collection. The 270 collection is one of the deepest GEN2 drawer sizes, making it ideal for larger storage needs around a desk, workshop, maker space, garage, or home.


The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.


Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.


For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.


See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.

GEN2 240 Decor Drawers - All

Decor Drawer 240-1W-1H.stl

Decor Drawer 240-1W-2H.stl

Decor Drawer 240-1W-3H.stl

Decor Drawer 240-1W-05H.stl

Decor Drawer 240-1W-15H.stl

Decor Drawer 240-2W-1H.stl

Decor Drawer 240-2W-2H.stl

Decor Drawer 240-2W-3H.stl

Decor Drawer 240-2W-05H.stl

Decor Drawer 240-2W-15H.stl

Decor Drawer 240-3W-1H.stl

Decor Drawer 240-3W-2H.stl

Decor Drawer 240-3W-05H.stl

Decor Drawer 240-3W-15H.stl

Decor Drawer 240-4W-1H.stl

Decor Drawer 240-4W-2H.stl

Decor Drawer 240-4W-05H.stl

Decor Drawer 240-4W-15H.stl

I'll show you how to build your own mesmerising table top coasters. A practicable and fun arts project for all ages and abilities. 

Laser Cut or 3D Print these amazing and customisable coasters. 

Etsy Store Kits with or without pre-cut wood: https://diymachines.etsy.com/listing/1693030560 

 -- Creality Falcon 2 22w Laser Cutter & Engraver: –  https://geni.us/CrealityFalcon2-22w 

 ------------------------- 

List of items used in this project and where to find them:

3mm Sheet Plywood or similar https://geni.us/3mmPlywood
AA Battery Holders (x2) https://geni.us/AABatteryPCBMount
Small Geared DC Motor (x1) https://geni.us/MiniGearedDCMotor
Super glue https://geni.us/SuperGlueLongNeck
Tiny magnets 3x3mm (4 for the base, 8x per coaster) https://geni.us/3x3mmMagnet
Batteries https://geni.us/AABatteries ■ Reed switches - Normally Open Type. (x4) https://geni.us/ReedSwitch
And some Bolts and screws (M4x5mm x four and M1.6x3mm x two)
Projects PCB: https://www.pcbway.com/project/shareproject
 

These are some of my favourite tools I use and can recommend:
Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
Bosch Bit Driver: https://geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines

Prusa support my channel when you use that link at no cost to yourself. :)

==========

Wiring diagrams, FAQ etc can be found here: https://www.diymachines.co.uk/make-your-own-kinetic-coasters 

SAY THANKS: Provide continual and dependable support through Patreon: https://www.patreon.com/diymachines

Or join this channel on Youtube Memberships: https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE:

https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: https://www.instagram.com/diy_machines
FACEBOOK: https://www.facebook.com/diymachines/
ETSY: https://www.etsy.com/uk/shop/DIYMachines
 

 ========== List of camera and lighting equipment I use:

Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip
Disclaimer: This video is shared for demonstration purposes only.

KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic

Top - Honeycombe.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each piece to match your unique style and space.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**MAKERCHIP DRAWER**
I designed this special drawer as a convenient way to nicely organize MakerChips I create or collect. The drawer is designed to hold two stacked trays where chips can be placed. For more information on MakerChips or if you'd like to make your own visit **[K2_Kevin's account](https://thangs.com/designer/K2_Kevin)**
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [165 (MINI) length](https://www.jerrari3d.com/gen2-modular-system/mini). 

Choose a Faceplate
Download and customize faceplates [HERE](https://www.jerrari3d.com/gen2-modular-system/decor-faceplates)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies) but PLA can be used as well
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Label Maker (makes 12mm labels) - [I prefer this one](https://amzn.to/410DL1p)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)

UPDATE: 

• NEW Magnet Clip - This replaces the magnet slots with a more reliable and universal design.

Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

GEN2 MakerChip Drawer 185-2W-2H

185-2W-2H Case.stl

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in **LARGE** length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/large)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

_____________________

**270 Collection**
The 270 Collection takes drawer length a step further, built to take advantage of extended build plates like those on the Prusa XL and Bambu H2D. These oversized drawers offer generous storage in a single print, making them perfect for tools, cables, or larger parts that don’t fit in shorter units. If you’ve got the printer space, the 270 Collection makes sure you put it to good use. Find all the 270 models **[HERE](https://www.jerrari3d.com/gen2-modular-system/large)**

__________________

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit




GEN2 Table Top Kit V2 - 270

Cover - Lower - Single - LARGE.stl

270-1W-1H Case.stl

270-1W-1H Classic Drawer.stl

270-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in STANDARD length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/standard)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

___________________________

**185 Collection**

The 185 Collection offers decent storage volume while also maintaining compatibility with the widest range of 3D printers. Find all compatible 185 collection models here [HERE](https://www.jerrari3d.com/gen2-modular-system/standard)

__________________________________

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit




GEN2 Table Top Kit V2 - 185

Cover - Upper - Double - STANDARD.stl

GEN2 QuickLocks V1.stl

TPU Feet X4.stl

185-1W-1H Case.stl

185-1W-1H Classic Drawer.stl

185-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
_________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

The GEN2 Decor Gridfinity Drawers - Standard are a collection of the standard length drawer bodies, they combine the best of both the GEN2 Storage System and the Gridfinity system by [Zack Freedman](https://thangs.com/designer/ZackFreedman). The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room. 

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:

• [GEN2 Modular Drawers - STANDARD](https://than.gs/m/1042322) - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!

• [GEN2 Table Top Kit - STANDARD](https://than.gs/m/1042322) - This kit contains covers and feet to place the drawers on any surface.
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**DECOR DRAWERS (OPTIONAL)**
• GEN2 Decor Drawers - STANDARD - [DOWNLOAD](https://than.gs/m/1116945)


**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time. You'll at least need the drawer case from this model kit to get started - GEN2 Modular Drawers - Standard. 

GEN2 Decor Gridfinity Drawers - Standard

GEN2 Decor Gridfinity Drawer Double - Standard.stl

**For Instructions Download the:**
>[GEN2 Interactive Catalog Download](https://tinyurl.com/GEN2system)

The Crystal Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - https://than.gs/m/1116945

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - Crystal

Crystal B Wide - Handle 44mm .stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The BlockBar Series is part of the **GEN2 Decor series**. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4dEgnLM) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**UPDATE: V1.1** (1-21-2024)
• This update omitted the M3 nut slot and instead uses a new self-tapping hole for M3 screws.
• I've also added a few of my original BlockBar handle designs that didn't make the initial cut

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - BlockBar

V1.1 BlockBar A - Handle 44mm.stl

V1.1 BlockBar B - Handle 44mm.stl

V1.1 BlockBar C - Handle 44mm.stl

V1.1 BlockBar D - Handle 44mm.stl

V1.1 BlockBar E - Handle 44mm.stl

V1.1 BlockBar F - Handle 44mm.stl

V1.1 BlockBar Knob.stl

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Professional quality:
High-resolution STL designed for clean slicing, sharp details, and excellent print results. Compatible with both FDM and resin printers.
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20 (draft)

Nozzle: 0.4  for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

D256.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The Essential Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an M3 screw and nut.

The key feature of Essential series offers is the ability to customize the faceplate easily in a number of way. With a flat surface you can print with different textured beds for pleasing appearance or add logos, designs, or text within your slicer.

Faceplates are available in two variations, a single center hole for knobs or a two holes for handles. Oh right! let's look at available handles so you can see what's available.

**Update 10/3/2024:** _V1.1 - Slightly larger to cover top and bottom gaps in drawer cases_

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Poplar Wood Filament](https://amzn.to/3X0rYzz) (this is what I used in many of my photos) ps. use hardened nozzle for abrasive filaments.
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.


GEN2 Decor - Faceplates - Essential Series

Essential - Double - 44mm Handle.stl

Essential - Single - 44mm Handle.stl

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

Useful Resources for Local 3D Printing Sellers

If you run a local business and need simple 3D models (figures, keychains, cutters, multilayer designs, etc.) to print and resell physically, I’ve enabled a subscription option on Thangs where you can download up to 30 files per month, choosing freely from the entire catalog.
Rollover system — your unused downloads stack up 🔄

It’s designed for makers who need a steady variety of designs without purchasing each file individually every time.

⚠️** Limited slots**
This plan is designed for creators who need a constant flow of ready-to-print STL models for physical resale.
If the slot shows as available, it means there is still space. If it becomes full, you will need to wait for the next opening period.

Designed for 220x220 mm beds — feel free to resize the model as needed.

Below are the printing settings I personally use.
These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20% (draft)

Nozzle: 0.4 mm for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

Christmas Bird Ornament STL

D728.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 185 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.

This listing includes all **18 size variations** of the 185 Decor Drawer collection. The 185 is the GEN2 Standard — the best all-around drawer size and the most printer-compatible option in the lineup. If you're not sure where to start with GEN2, this is the size we recommend first.

The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.

Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.

For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.

See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.


GEN2 185 Decor Drawers - All

Decor Drawer 180-1W-05H.stl

Decor Drawer 185-1W-1H.stl

Decor Drawer 185-1W-2H.stl

Decor Drawer 185-1W-3H.stl

Decor Drawer 185-1W-15H.stl

Decor Drawer 185-2W-1H.stl

Decor Drawer 185-2W-2H.stl

Decor Drawer 185-2W-3H.stl

Decor Drawer 185-2W-05H.stl

Decor Drawer 185-2W-15H.stl

Decor Drawer 185-3W-1H.stl

Decor Drawer 185-3W-2H.stl

Decor Drawer 185-3W-05H.stl

Decor Drawer 185-3W-15H.stl

Decor Drawer 185-4W-1H.stl

Decor Drawer 185-4W-2H.stl

Decor Drawer 185-4W-05H.stl

Decor Drawer 185-4W-15H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
_______________________
**THIS IS A SAMPLE FACEPLATE FROM THE [GEN2 Decor - Faceplates - EdgeLabel Series](https://than.gs/m/1215609)**
Feel free to use the faceplate as usual, if you enjoy the EdgeLabel faceplate please consider supporting the project by joining the [Jerrari Club ](https://thangs.com/designer/Jerrari)or by purchasing the full faceplate collection here: https://than.gs/m/1215609

The EdgeLabel Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies and slide your personalized faceplate in place. Lock in place with an optional M3 screw and nut.

The EdgeLabel series is focused on functioning as a modular method to label drawers easily. The faceplates feature a built in handle than looks modern and pairs nicely alongside the original GEN2 drawers. They are designed to be easy to print using multiple colors not only on multicolor 3D printers, but single color printers as well.

**What You'll Need**
 
Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of all compatible drawers.

This faceplate will fit any drawer that is 1W-1H in any of the lengths shown on jerrari3d.com, such as ones labeled 185-1W-1H.

**HARDWARE**
_Includes affiliated links to help support my projects_
• Filament - PLA (I used Prusa Orange PLA)
• M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)
 
Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**


**UPDATE** V1.2 (3-15-2025)
• This update introduces even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.
• Print Accent pieces facedown on textured plates for outstanding results

**INSTRUCTIONS**
See attached instructions



GEN2 Decor - Faceplate - EdgeLabel Intro Edition

EdgeLabel 1W-1H.3mf

1W-1H Accent.stl

1W-1H Back Cover.stl

EdgeLabel 1W-1H.stl

 Merry Christmas Text Ornament STL

D719.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This GEN2 Decor Drawers - STANDARD is a collection of the standard length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length.

To customize these drawer here are my recommended links to get started, you can also fin more at jerrari3d.com
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - STANDARD

gen2-2x1-decor-gridfinity-magnet-double-drawer-standard.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This is a collection of the SMALL length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in SMALL length. Here are my recommended links to get started:
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

GEN2 Decor Drawers - SMALL

GEN2 1x0.5 Slim Single Case - SMALL.stl

GEN2 1x0.5 Slim Single Drawer - SMALL.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 270 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.

This listing includes all **18 size variations** of the 270 Decor Drawer collection. The 270 collection is one of the deepest GEN2 drawer sizes, making it ideal for larger storage needs around a desk, workshop, maker space, garage, or home.

The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.

Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.

For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.

See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.

GEN2 270 Decor Drawers - All

decor-drawer-270-1w-1h.stl

decor-drawer-270-1w-2h.stl

decor-drawer-270-1w-3h.stl

decor-drawer-270-1w-05h.stl

decor-drawer-270-1w-15h.stl

decor-drawer-270-2w-1h.stl

decor-drawer-270-2w-2h.stl

decor-drawer-270-2w-3h.stl

decor-drawer-270-2w-05h.stl

decor-drawer-270-2w-15h.stl

decor-drawer-270-3w-1h.stl

decor-drawer-270-3w-2h.stl

decor-drawer-270-3w-05h.stl

decor-drawer-270-3w-15h.stl

decor-drawer-270-4w-1h.stl

decor-drawer-270-4w-2h.stl

decor-drawer-270-4w-05h.stl

decor-drawer-270-4w-15h.stl

drawer-stoppers.stl

gen2-ql-locking-mechanism-bi-directional-optional.stl

gen2-quicklocks-v111.stl

magnet-insert-6x2mm.stl

magnet-insert-10x2mm.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 115 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.

This listing includes all **18 size variations** of the 115 Decor Drawer collection. The 115 is a compact GEN2 size, great for desk storage, small workstations, and tight spaces where a deeper drawer would be overkill. Fast to print and easy to expand as your needs grow.

The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.

Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.

For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.

See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.


GEN2 115 Decor Drawers - All

Decor Drawer 115-1W-1H.stl

Decor Drawer 115-1W-2H.stl

Decor Drawer 115-1W-3H.stl

Decor Drawer 115-1W-05H.stl

Decor Drawer 115-1W-15H.stl

Decor Drawer 115-2W-1H.stl

Decor Drawer 115-2W-2H.stl

Decor Drawer 115-2W-3H.stl

Decor Drawer 115-2W-05H.stl

Decor Drawer 115-2W-15H.stl

Decor Drawer 115-3W-1H.stl

Decor Drawer 115-3W-2H.stl

Decor Drawer 115-3W-05H.stl

Decor Drawer 115-3W-15H.stl

Decor Drawer 115-4W-1H.stl

Decor Drawer 115-4W-2H.stl

Decor Drawer 115-4W-05H.stl

Decor Drawer 115-4W-15H.stl

 🎁 **5 MONTHS FREE with annual plans** - Save 42%

---

### **SquareBear Gift & Storage Box 🐻🎁**

The cutest way to wrap or store your treasures!  
SquareBear is a fun bear-shaped box with a clever spring-lid and roomy 144 × 118 × 105 mm interior — perfect for candy, jewelry, or little surprises. Adorable, practical, and sure to make anyone smile!

😊 **Why You'll Love It:**  
- 🧸 **Charming Design** brings warmth and joy to your desk or shelf  
- ⚙️ **Spring-loaded lid** opens smoothly for a delightful experience  
- 💡 **Smart modular parts** allow easy multi-color prints with crisp details  
- 🖨️ **Single-color model** prints beautifully on any 200 mm+ printer  
- 🎁 **Perfect for gifting** small presents, treats, or keepsakes  

---

📐 **Quick Specs:** Fits candy, jewelry, and small items (144 × 118 × 105 mm interior | requires 200 mm build plate)  

---

🎨 **Filament Used:**  

✨ **Beige Scarf Bear:** PLA MATTE CARAMEL ([Get it](https://shrsl.com/4x83l)) • PLA MATTE DESERT TAN ([Get it](http://shrsl.com/4xcnx))
🌸 **Pink Scarf Bear:** PLA WOOD BLACK WALNUT ([Get it](https://tidd.ly/3X3IQEC)) • PLA MATTE PINK ([Get it](http://shrsl.com/4xhj3))
❄️ **Blue Scarf Bear:** PLA WOOD OCHRE ([Get it](https://tidd.ly/3Wvsuo9)) • PLA MATTE ICE BLUE ([Get it](https://tidd.ly/4hGYuzt)) 

• PLA Basic Black ([Get it](https://shrsl.com/4whua)) • PLA Basic White ([Get it](https://shrsl.com/4wht2)) • PETG/ABS Springs (any color)

---

🛠️ **Hardware Used:**  
• None – 100% 3D printed parts including springs and latch  

---

⚠️ **Important:** **All common filaments will creep over time.** PLA is the worst, PETG performs better, and we originally believed ABS would hold up long-term — **but after about a month, ABS also begins to lose elasticity**.  
We’re currently testing **PC** as a potential long-term solution.  
Please **print this model only if you're okay with these current limitations**.


---

📋 **Print Settings:** See included README.md for detailed instructions  

---

🎯 **New to 3D Printing?** Perfect prints guaranteed → [Start Here](https://than.gs/p/250559)



SquareBear Gift & Storage Box 

0_SquareBear.3mf

Hey, 
this is a big print and project.
This Chess set can transform into an isometric chess board. You can also play hidden and of course normal chess on it.
I designed it to be printable on any printer of any size, you don't even need a multicolor printer.

**Watch my Video about the Project to get all the details.**
[https://youtu.be/z1DQpTCu3h0](https://youtu.be/z1DQpTCu3h0)

Isometric Chess Rules: [https://youtu.be/EGejHnEqoPA?si=UchxSpKUntjmFg0A](https://youtu.be/EGejHnEqoPA?si=UchxSpKUntjmFg0A)
Hidden Chess Rules: [https://www.youtube.com/watch?v=xwzLmQxXdoY](https://www.youtube.com/watch?v=xwzLmQxXdoY)
I didn't invent these chess variations, full credit goes to the creators of these videos.


**You need:**
Magnets buy 300 5x3 mm. You can get them cheap on Amazon.
**Parts in Black:**
18 Board middle Pieces
3 Board Left Pieces
3 Board Right Pieces
3 Board Top Pieces
3 Board Bottom Pieces
1 Board Bottom Left Piece
1 Board Top Right Piece

All Normal Chess Pieces in Black

All Isometric Chess Pieces in Black

All hidden Chess Pieces in Black

**Parts in White:**
18 Board middle Pieces
3 Board Left Pieces
3 Board Right Pieces
3 Board Top Pieces
3 Board Bottom Pieces
1 Board Bottom Right Piece
1 Board Top Left Piece

All Normal Chess Pieces in Black

All Isometric Chess Pieces in Black

All hidden Chess Pieces in Black

**Any Color:**
The Seal and the Connectors can be printed in any color you want.

**Print Settings:**
Everything can be printed with standard settings and no supports.

**Assembly:**
[Watch my Video](https://youtu.be/z1DQpTCu3h0)

**Technical Data:**
One Board needs roughly 1.3 kg of Filament but keep in mind we are printing 2 colors.
The print time is roughly 2 days.
I used Sunlu Meta PLA in black and white to printe everything.

Twisty Chess Board by Ruven Bals

Twisty Chess by Ruven Bals.3mf

Designed by us, 3D printed by you.
This is Angled, a print-in-place pen case with stencil, bookmark, and phone stand.
A PDF with 3D printing settings is included.

Angled, pen case with stencil, bookmark, and phone stand.

Case print in place.stl

**This is an attachment for The Rail.** The full required system can be downloaded [HERE](https://thangs.com/designer/LoftedGoods/3d-model/The%20Rail%20v2-1397922).

Note that the **planters pictured are not included** with this model. If you'd like to download them, you can find them [here](https://thangs.com/designer/LoftedGoods/3d-model/The%20Rail%20-%20Ira%20Planter-1458872)

------------------------------------------------------------------------------------------

I've had quite a few requests for a free standing version of The Rail, so here it is! The tripod attachment can be attached to the dowel using two #8x1 screws. The hole for the vertical dowel goes all the way through the attachment, so you can position it wherever you want on the dowel. Each leg can be secured to the attachment with screws as well, although it's not entirely necessary. When using screws, make sure you pre-drill using an 1/8" drill bit.

I have included attachments for 1" dowels as well as 25mm dowels. There is also a 4-legged attachment if you prefer that look.

For the legs, I used the same size dowel I used for the vertical one, and cut them into 10" lengths using a [miter box and hand saw set](https://a.co/d/dVGe9gE) (you can find these at any hardware store). You can also just buy shorter dowels if you don't want to cut them.

I have also included optional feet caps that can be glued on to the ends of the legs.

------------------------------------------------------------------------------------------

**Supports**
None needed!

------------------------------------------------------------------------------------------

**Scaling**
I wouldn't recommend scaling since these are meant to attach to a 1" or 25mm dowel.

------------------------------------------------------------------------------------------

**Orientation**
- The tripod and quadpod print upside down
- The feet caps print right side up

------------------------------------------------------------------------------------------

**Print Settings**
- .2mm layer height
- 15% grid infill
- 2 walls

------------------------------------------------------------------------------------------

**Filament**

**[Bambu Lab Matte PLA](https://shrsl.com/4v5m0)**

Colors I used:
- Ivory White

------------------------------------------------------------------------------------------

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

The Rail - Tripod Attachment

Rail Tripod.stl

THALOR Tissue Holder is a minimalist paper towel holder designed to match the THALOR planter and THALOR organizer. It carries the same  vertical texture, and elevated stance for a cohesive look across the collection.
Designed for everyday use, it holds standard kitchen paper towel rolls while keeping the counter visually light and uncluttered.

**Inner diameter:**
**130 mm** (fits standard paper towel rolls)
**170 mm** XL (EXPERIMENTAL) 

THALOR Tissue Roll Holder

COMPLETE kitchen tissue roll holder.3mf

**🐸 Froggy Catch-all Trinket Dish 🐸**

- 2 walls, 15% gyroid or 3D honeycomb infill. No supports.

- Eyes print separately and should be glued into place

+
+
**📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - [Click here](https://thangs.com/designer/Layersingreen?srsltid=AfmBOoo-_xVHCWbHkQXF90e5PVCiusocCbRnGcPXimgvcFGcwYfZNsAb)📌**

-Free- Froggy Catch All Dish

Froggy_catch_all_frog.stl

Digital Store
Decor

Videos this Month

Categories

Videos

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Clips

SquareBear Gift & Storage Box

Twisty Chess Board by Ruven Bals

Angled, pen case with stencil, bookmark, and phone stand.

The Rail - Tripod Attachment

THALOR Tissue Roll Holder

-Free- Froggy Catch All Dish

SquareBear Gift & Storage Box

Twisty Chess Board by Ruven Bals

Angled, pen case with stencil, bookmark, and phone stand.

The Rail - Tripod Attachment

THALOR Tissue Roll Holder

-Free- Froggy Catch All Dish

GEN2 2x0.5 Parts Drawer V2 - 15s - STANDARD.3mf

KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

GEN2 Decor Gridfinity Drawers - Standard

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

GEN2 Decor - Faceplate - EdgeLabel Intro Edition

Digital StoreDecor

Videos this Month

Categories

Videos

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Clips

SquareBear Gift & Storage Box

Twisty Chess Board by Ruven Bals

Angled, pen case with stencil, bookmark, and phone stand.

The Rail - Tripod Attachment

THALOR Tissue Roll Holder

-Free- Froggy Catch All Dish

SquareBear Gift & Storage Box

Twisty Chess Board by Ruven Bals

Angled, pen case with stencil, bookmark, and phone stand.

The Rail - Tripod Attachment

THALOR Tissue Roll Holder

-Free- Froggy Catch All Dish

GEN2 2x0.5 Parts Drawer V2 - 15s - STANDARD.3mf

KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

GEN2 Decor Gridfinity Drawers - Standard

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

GEN2 Decor - Faceplate - EdgeLabel Intro Edition

Digital Store
Decor