Octopus - Cinder Hatchling

Cinderwing3D Octopus Hatchling Colors.3mf

Tiny Donut Spider

Cinderwing3D Tiny Spider Donut Color.3mf

Mini Print-in-Place Vise

**Print-in-Place Mini Vice**
This mini vise prints vertically as one piece using no supports. There are small pads on the moving jaws that reduce the clearance required in order to print it in place.  The risers under the vise allow the handwheel to be turned while sitting on a flat surface. The knob on the hand wheel should swivel as well.  The jaws are 64mm wide and  open to 80mm.  It has an overall printing height of 164mm.

**Print Instructions**
The moving jaws form on top of the serrations of the stationary jaw and as a result it’s important that you use a .4mm nozzle x .45mm line width, and .2mm layer heights if printing at 100%.  To free the jaws after printing I pried slightly with a screw driver on each side of the jaws before opening it with the screw.

The hardest thing about this print is probably the overhangs and bridging as a result of the weight saver holes.  If these hole are causing people issues I can make a version without them but I think most printers have adequate cooling to handle it. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.

Printed with [3D Fuel Silver PLA]( https://www.3dfuel.com/collections/175ppla)


Print-in-Place Mini Vice

Mario and Yoshi - Super Mario Bros - Fan Art

Mario and Yoshi - Super Mario Bros - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Cubone - Pokemon - Fan Art

Shenron - Dragon Ball Z - Wall Decoration 

Shenron - full.stl

Vampire Skull - Decoration

Vampire Skull - Decoration
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Togepi - Pokemon - Fan Art

Togepi - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

TCG Munkey Card Scanner With Phone Tower

Card Scanner1.stl

Dolphin - Cinder Hatchling

Cinderwing3D Dolphin Hatchling.stl

Articulated Lava Dragon- Elder

Plastic3D Precolored V2 -Adult- Articulated Dragon 7-LAVA DRAGONS .3mf

Mandala Lace Skull

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

This model will print with VERY minimal support.

If you would like to sell physical objects, please see the Chaos Core Partner tier on https://www.patreon.com/chaoscoretech

Dragon - Supportless

Baby Mushroom Dragon

Cinderwing3D_BABY_MushroomDragon.3mf

Tray “waterdrop”

tray.stl

Cookie Heart Dragon

Cinderwing3D Cookie Heart Dragon Colors.3mf

Articulated Highland Cow – A Moo-ving Print

HIGHLAND COW KEYCHAIN.stl

The Rail

The Rail.3mf

Manta Ray - Cinder Hatchling

Cinderwing3D Manta Ray Hatchling Colors.3mf

Seal - Cinder Hatchling

Cinderwing3D Seal Hatchling Colors.3mf

A compact and stylish 3D-printable roll-top organizer that is easy to print and assemble. No extra parts, no glue, no AMS – just print, screw together, and enjoy an elegant box with a roll-top door that opens together with the drawer💍

- Size: 102 × 94 × 61 mm
- Fully 3D-printable – no additional parts needed
- Easy screw assembly, no glue required 🔩 
- No AMS needed – compatible with any printer
- Smooth roll-top door linked with the drawer ✨

**Pre-sliced .3mf print profile optimized for Bambu Lab printers**

Tambour Box | Roll top Storage Box | Organizer

Tambour Box.stl

This is the **Ancient Dragon Book & Tablet Display**! This model is the result of a lot of refinement, and the lessons I’ve learned from my other two dragon book display variations (Flamewing and Book Wyrm). As the others, this one also prints support-free.

The dragon’s wings extend all the way down to the build plate, which adds stability and helps minimize print errors. The book prints as a separate piece, making it much faster and easier to print it in a different color.

In total, there are eight different versions included, giving you a wide range of display options.

**Included Versions**

- Complete dragon with slots for 6mm glass eyes (I used these- [https://a.co/d/enxPFpa](url))

- Complete dragon with pre-colored, printable eyes (no inserts required)

**Book opening sizes:**

- 15mm – small books or tablets

- 35mm – medium-sized books

- 62mm – large books

**Each opening size is available with both eye options.**

**Print Time & Filament Usage (Bambu Lab A1)**

**Dragon**

~9 hours

~177g of filament

Support-free

**Book**

Multicolor print:

~6 hours

~87g of filament

Single-color print:

~32 minutes

~7g of filament

**Recommended Print Settings**

Layer height: 0.20mm

Walls: 3

Infill: 5% gyroid

Supports: None

In your slicer you can 'Simplify' the model to save on print time, but sacrifice detail

**Filament & Finish**

- Printed in Galaxy Dark Red filament from Panchroma (Polymaker) ([https://us.polymaker.com/products/panchroma-galaxy?variant=43595081777209](url))

- Finished with Gold Rub ’n Buff for an aged, ancient look

Happy Printing! 
-Christian, @CraftyKid3D

Ancient Dragon Book & Tablet Display

Ancient Dragon Book Display.3mf

The SLOZENA vase is a minimalist pleated vase design available in three heights:
18 cm, 20 cm, and 22 cm — perfect for dried flowers or sculptural decor.

This model includes an optional “MADE WITH ♥” tag, designed for two-color printing.
You can print the tag using an AMS system, or with a manual filament change on single-color printers.

SLOZENA pleated vases set

VASES.3mf

**VERY IMPORTANT:** use flexible material. if you will use materials that are too stiff, they will need too much force to be pushed down and then the weight of phone etc will not be enough to push the pins down. So USE materials that are more elastic and will not keep the pins static. 

This adaptive phone and tablet stand uses a surface made of 77 spring-loaded pins that automatically adjust to whatever you place on top. Each pin moves independently, allowing the surface to shape itself around a phone, tablet, or other device. When nothing is placed on it, the pins stand raised above the surface, but once a device is set down they compress and create a stable, custom support.

The design turns a simple stand into an interactive mechanical surface. The grid of moving pins creates a satisfying visual effect as they shift and settle around the shape of the object. It’s inspired by classic pin-art boards, but redesigned into a functional desk accessory that adapts to different devices instead of using fixed supports.

This design is also part of a personal challenge I’m doing for the year 2026: designing and releasing a brand new 3D printable model every single day for an entire year. Each design will explore a different idea—some practical, some playful, some reflective. If you enjoy following creative processes, testing new designs, or simply watching ideas turn into physical objects, feel free to follow along and join me on this 365-day journey.

YouTube: https://www.youtube.com/@Mazetropolis
TikTok https://www.tiktok.com/@mazetropolis
Instagram: https://www.instagram.com/mazetropolis/

Adaptive Pin Surface Phone & Tablet Stand

Adaptive_pins_holder_spring.stl

**PSYCHIC JELLYFISH – Miniature** 🪼🌀

A strange little floaty creature, drifting out of the Underdark.
Tentacles outstretched, head bobbing, always curious about the world above.

I posed him reaching with one tentacle like he’s just about to poke something he really shouldn’t.

**Key Features:**
✔ Multicolor 3MF file — no painting needed
✔ Support-free design — prints in two easy pieces
✔ Head detaches for clean printing (glue it on)
✔ Recommended layer height: 0.12mm

Perfect as a quirky NPC, a strange familiar, or just a weird little void creature to confuse your adventurers.

_This product is not affiliated with, endorsed, or approved by Wizards of the Coast._

Psychic Jellyfish - Easy Multicolor FDM RPG Minis (No supports)

SuperPrints Psychic Jellyfish.3mf

**KOBOLDS – Fantasy Miniature Set** 🐉💎

Three mischievous little troublemakers ready to raid your next campaign! 

- The Spearman, armed and ready for a fight.
- The Thief, clutching a bag of stolen treasure and a butcher’s knife.
- The Shaman, casting a spell with his bone wand.

Each one prints beautifully in multicolor: clean, detailed, and full of personality.

**Key Features:**
✔ Multicolor 3MF files, no painting required
✔ Support-free design, prints clean off the plate
✔ Recommended layer height: 0.12mm
✔ Prints great in Bambu Matte PLA

Play them as enemies, NPCs, or your new favorite party mascots, either way, they’ll steal the show.

_This product is not affiliated with, endorsed, or approved by Wizards of the Coast._

Kobolds - Easy Multicolor FDM RPG Minis (No supports)

SuperPrints Kobolds.3mf

Digital Store
Most Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Octopus - Cinder Hatchling

Tiny Donut Spider

Mini Print-in-Place Vise

Mario and Yoshi - Super Mario Bros - Fan Art

Cubone - Pokemon - Fan Art

Shenron - Dragon Ball Z - Wall Decoration

Vampire Skull - Decoration

Togepi - Pokemon - Fan Art

TCG Munkey Card Scanner With Phone Tower

Dolphin - Cinder Hatchling

Articulated Lava Dragon- Elder

Mandala Lace Skull

Dragon - Supportless

Baby Mushroom Dragon

Tray “waterdrop”

Cookie Heart Dragon

Articulated Highland Cow – A Moo-ving Print

The Rail

Manta Ray - Cinder Hatchling

Seal - Cinder Hatchling

Digital StoreMost Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Octopus - Cinder Hatchling

Tiny Donut Spider

Mini Print-in-Place Vise

Mario and Yoshi - Super Mario Bros - Fan Art

Cubone - Pokemon - Fan Art

Shenron - Dragon Ball Z - Wall Decoration

Vampire Skull - Decoration

Togepi - Pokemon - Fan Art

TCG Munkey Card Scanner With Phone Tower

Dolphin - Cinder Hatchling

Articulated Lava Dragon- Elder

Mandala Lace Skull

Dragon - Supportless

Baby Mushroom Dragon

Tray “waterdrop”

Cookie Heart Dragon

Articulated Highland Cow – A Moo-ving Print

The Rail

Manta Ray - Cinder Hatchling

Seal - Cinder Hatchling

Digital Store
Most Popular