Does your fridge fight for liberty? It could, with these arrows and some 2x6mm round magnets.

Designed to be printed flat side down.

Helldivers 2 Stratagem Arrow Fridge Magnet

Helldivers 2 Strategem Arrow.stl

It holds 7 gameboy cartridges, of various flavors. Any game cartridge that fits in a GBA should fit just fine.

Gridfinity Gameboy Cartridge Holder

Holds 25 Sharpie markers with the points facing down, which is pretty much required for metallic colors and just kind of a good idea for all the other ones.

Gridfinity Point Down Sharpie Holder

Holds 15 Sharpie markers with the points facing down, which is pretty much required for metallic colors and just kind of a good idea for all the other ones.

A non-gridfinity version of my PCI-E Card holder.

This is meant for smaller, generally single slot cards. If you throw a 4090 on this puppy and it falls over, that's on you. Differently designed slot covers will result in a bit of tilt to your cards.

Regular PLA isn't ESD safe, so use at your own risk.

12x PCI-E Card Holder

This is meant for smaller, generally single slot cards. If you throw a 4090 on this puppy and it falls over, that's on you. Differently designed slot covers will result in a bit of tilt to your cards.

Regular PLA isn't ESD safe, so use at your own risk.

Gridfinity PCI-E Single Slot Card Holder

Are you compact? Stylish? 4U rackmount? Do you have nowhere to mount a 120mm fan? You might be an iStarUSA D-416.

These brackets use #6-32 nuts and #6x1/2 machine screws to mount a standard 120mm fan to the front of the 5.25 bays. You'll need 2 L and 2 R brackets.

There are two versions, the 25mm version should fit most fans, but ones with thick vibration pads may require the 26mm. Print with the rectangular side down. Removing the front door of the case is also recommended.

If you'd like to convert this to metric, I've included the f3d file.

D-416 120mm Fan Brackets

Bracket L 25mm.stl

A 45 Degree holder for pliers in shallow drawers. Tessellating a few is recommended.

Gridfinity 45 Degree Pliers Holder

45 Degree Pliers Holder

Bismuth Stand

BismuthStand.stl

[Mastodon](https://beige.party/@giantweevil)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

zqft9001

Achievements

Seedling

Trailblazer

Fan Favorite