Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4038198.

I needed a bookend for my daughter's new bookshelf and so I made one with a model of a F-16 fighter. Its ridiculous, but awesome. Its rather big, but could easily be scaled to be smaller. Put some grippy feet on the bottom so that it wont slide.

F16 book end

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3689885.

Made a sloth coaster and a holder for eight coasters. Also have a version that is plain with no sloth. The coaster holder can stand on its own, but I dadoed a piece of African Rosewood and epoxied it into place. Either would work just fine.
Note: The pictures of the coasters have my families name on them since I printed them for us, but the uploaded versions do not have that.

Sloth/Plain Coaster and Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4941921.

EDIT: I realized my design only worked in a horizontal direction and not a vertical one. I therefore redesigned it to work vertically, have a bit more friction, and minimize the amount of material needed.

This is designed to hold your XChange tool plates, allowing you to mount them in a variety of positions. The tolerances hold the tool plate by the pins fairly securely so they shouldn't fall out if bumped.
There are two versions, one has M3 socket holes to mount to a piece of 2020 extrusion, the other has countersunk holes for screws to mount to wood. The pictures have mounting holes only in one direction, but the uploaded version has mounting holes in both directions.
I printed with four wall layers for a bit more strength, but not sure if that's actually needed.

Inspired by Woodwaker's design.

XChange Tool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1505844.

I wanted an extremely simple key book type thing and all the ones I found were a lot more complex so I just made one.
Need to use 8-32 screws of whatever length you want for the keys you have and I used a locknut for the other side.  If you have them available, I modeled it around using VEX Robotics screws as I have a bunch in my classroom. Otherwise any 8-32 screw will work.
Everything is press-fit to make sure it nice and tight.

Also included are a lanyard holder and a spacer if needed.


Edit: I uploaded a new version of the lanyard holder which is a bit stronger. Mine kept breaking while I was swinging it around so this should help keep that from happening.

Simple swiss army style key book

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4936885.

EDIT: I dropped a tool plate and it the pin broke at the base of the plate which made removal really difficult. Therefore I modified the design with a section that will break intentionally if dropped so that you can still remove it.
The locator pins for the XChange are designed to break instead of more important parts breaking in a crash. I found out the hard way that the pins work as designed, and broke in a nozzle crash instead of damaging anything else on the printer. But new pins are prohibitively expensive for something that can break easily. So I measured and designed new ones, and they work perfectly.
Print 100% fill. They would be stronger on their sides, but I printed them standing upright and they worked fine. I also printed with four walls for a bit more strength.

XChange Replacement Pins

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4688307.

I really liked Erikhellman's IKEA Alex Chamfered Organizer Box (https://www.thingiverse.com/thing:4308872) but needed a few more sizes. I therefore made:
* .5x.5
* .5x1
* 1x3
* 2x3

I also found them to be far taller than needed for my purposes/getting my fingers in to get stuff out, so I print all the boxes scaled to be 40mm high instead of their default height (leave all other dimensions the same in Cura) I've printed some to be 20mm high as well and double stack them for things that I only have a few of.

IKEA Alex Chamfered Organizer Box additional sizes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2615575.

The Vittles Vault pet food storage container lid is really hard to get off, so I made a handle to attach to the lid. Use #10 screws through the lid to attach it to the handle.

Vittles Vault Lid Handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3457976.

This is a combo holder for an external SD card reader, all the wrenches that come with the CR-10, and a holder for the scraper, pliers, and nozzle cleaner.

Also added a version with a slot in the top for a small post it note for leveling.

It holds all of the tools that come with the machine except for the scraper which I dont find works very well. I've used this model scraper for years and love it so thats what its designed for. https://www.thingiverse.com/thing:34481.

For the nozzle cleaner, I just used a small piece of foam from what it shipped with shoved in the hole to hold it.

I also glued on a mini pliers holder on the top which can be found here: https://www.thingiverse.com/thing:3459895 and an SD card holder which can be seen in one of the pictures.

CR-10 Tool and SD Card Holder Combo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3459895.

This is a small holder for a Husky 6 piece set of mini pliers but should work for other brands as well. I mainly use it for post processing of parts and so I glued it to the top of my tool holder here: https://www.thingiverse.com/thing:3457976

5 piece mini pliers holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3881403.

Made a taller version of the spool holder to fit a larger roll of filament on the top of a CR-10.

2020 tall vertical spool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2712236.

After printing a Kindle Fire stand for my tablet, I realized my Loupedeck editing console almost fits in it. So I made a new version thats a bit wider to hold it. This way you can use a loupedeck and keyboard at the same time and not take up as much space.
1/28/18--Added a wall mount version that uses drywall screws. I dont have space to mount it in my office so if someone prints it, please post a picture so I can see if it works or not.

Loupedeck Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3448676.

This is a chess set that I originally made on a CNC lathe out of metal, but will be printing soon to see how it looks printed.

Edit 2/26/19
Realized the files uploaded had STLs in inches which isnt standard. Replaced files with mm scaling.

Modern Chess Set

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2615614.

This is to hold a spray can on a wall. I use it to hold a can of Aquanet for our printers but it can be used for any spray can. Mounts using standard drywall screws.

Spray Can Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2141105.

I wanted my tripod and monopod to be able to hang off the side of my camera storage case so I made a holder that a standard 1/4-20 thread screws into.

After printing, get inserts such as McMaster #90267A571 or Home Depot #610169. Heat up the insert, and push it into the plastic hole. Once you align it (I used a bolt), run it under water to keep it in place.
The screw holes are for #8 countersunk screws to mount to whatever.

Tripod holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2164359.

This is a demonstration piece to teach students the different hole types including a spotface, clearance, countersunk, blind tapped, and counterbore hole. All holes would fit a 1/2-13 bolt. The type of hole is embossed on the back.

Drilled Hole Demonstration

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2615611.

This allows you to hold up to two replicator 2 build plates on a wall. Mounts using standard drywall screws.

Makerbot Replicator 2 Plate Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3511012.

Made a slightly smaller mount version of a medal holder since I didnt think it needed so much mass. Also put two tiny tabs on the front to prevent them from falling off if hit. You dont need to print with supports because they're so small.

Medal hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2866233.

This is a bracket to attach to the Canon Pro100 Cartridge holder I designed so that you can stack multiples on top of each other. Simply glue or solder two of them onto either side of the cartridge holder.

Canon Pro100 Cartridge Holder Stacker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2615604.

This is a wall mount for a single bin box sold on McMaster/MSC/Etc. Mounts with standard drywall screws and nests into each other to be able to hold multiple bin boxes.

Bin Box Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1714828.

The area under the hand brake on my 16 Focus ST is perfect for my phone but when I stop the phone slides  into my foot well. I therefore made a small lip that I glued to the space to keep the phone from flying.

Ford Focus ST under hand brake lip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2796497.

This is a holder for four syringes used to fill Canon Pro100 cartridges from Precision Colors.

Ink Syringe Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2796461.

This is intended to hold four ink bottles from Precision Colors neatly. I printed two for my Canon Pro-100 and glued them together to hold my ink.

Precision Colors Ink Bottle Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2796463.

This holds a set of eight cartridges for the Canon Pro100 with the Precision Colors clip on the bottom.
Pretty soon I'll release a stacking version as well.

Canon Pro100 Cartridge Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2866001.

These are two wall mount vases designed to be hung with a single screw and can are designed to hold one flower each, or a few small flowers

Single flower wall vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3068435.

Wanted a stronger holder for my Expand-It tools, so designed one that is extremely strong when the infill is only 10%. Also added a few small design tweaks to make it easy to insert tools and remove them. Hangs with 4, #6 drywall screws or similar.

Ryobi Expand-It Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2866009.

This ring is designed to fit around a gripe water bottle and hold the syringe next to it so that you dont lose it.

Gripe water holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

zcohenld

F16 book end

Sloth/Plain Coaster and Holder

XChange Tool Holder

Simple swiss army style key book

XChange Replacement Pins

IKEA Alex Chamfered Organizer Box additional sizes

Vittles Vault Lid Handle

CR-10 Tool and SD Card Holder Combo

5 piece mini pliers holder

2020 tall vertical spool holder

Loupedeck Stand

Modern Chess Set

Spray Can Wall Mount

Tripod holder

Drilled Hole Demonstration

Makerbot Replicator 2 Plate Wall Mount

Medal hook

Canon Pro100 Cartridge Holder Stacker

Bin Box Wall Mount

Ford Focus ST under hand brake lip

Ink Syringe Holder

Precision Colors Ink Bottle Holder

Canon Pro100 Cartridge Holder

Single flower wall vase

Ryobi Expand-It Hanger

Gripe water holder

Sloth/Plain Coaster and Holder

IKEA Alex Chamfered Organizer Box additional sizes

F16 book end

Simple swiss army style key book

2020 tall vertical spool holder

CR-10 Tool and SD Card Holder Combo

Drilled Hole Demonstration

XChange Tool Holder

Makerbot Replicator 2 Plate Wall Mount

Canon Pro100 Cartridge Holder Stacker

Bin Box Wall Mount

XChange Replacement Pins

Modern Chess Set

Ink Syringe Holder

Tripod holder

Vittles Vault Lid Handle

Medal hook

Spray Can Wall Mount

Single flower wall vase

Loupedeck Stand

Canon Pro100 Cartridge Holder

Precision Colors Ink Bottle Holder

5 piece mini pliers holder

Gripe water holder