Simple and useful bag clip.
Parts aligned for print bed, use auto generated slicer support (not much is needed). 
Attach the parts with the pin, use plastic hammer or press it all the way in. That's all

Bag Clip

Bag Clip v2.2 Part1.stl

Simple but efficient credit cards wallet. Holds the cards gently but firm.
Two top part option (with bills clip or without).

Cards wallet

Cards Wallet_Chassis.stl

cc wallet.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5690475.

Salt shaker clean and elegant design. Added pepper cap (smaller 3 holes).

Salt Shaker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5661720.

Designed for my HomePod mini to show respect...

HomePod mini designed stand

Ashtray Retro Royal.stl

Redesigned with tighter thread and shorter container (52/42mm total height, 19mm width)

Keychain Pill Container v3

Keychain Container v3.stl

My very first try on designing vase... 
I print it in vase mode with 0.6mm nozzle, line width 1.2mm, layer 0.2-0.8 for best results. 

Tested with marble PLA and ABS+

Vase 

My first try on designing vase... 
I print it in vase mode with 0.6mm nozzle, line width 1.2mm, layer 0.2-0.8 for best results. 

Tested with marble PLA and ABS+

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4780858.

This MagSafe holder optimized for iPhone 12/12 Pro size at 45 degree for convenience charging and using.
The holder made from 3 parts. Insert the MagSafe holder  into the base part, no need to glue or anything. The small part (trapeze profile) goes to the base, slide it from the side to hold the MagSafe cable to the base.

All parts are aligned to be printed on bed. No support or raft is needed.

_(The STL file doesn't include the printed letters shown in the picture)_

MagSafe Charger Holder for iPhone 12/12 Pro

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5238132.

Made this ashtray for my bro cause they don't sell it anymore. I used PETG hope it will last...
This one is small (100mm) Look at the 120mm version with more space.

Ashtray

Made it to test gear tolerance and rotation using hard to print materials.
I managed to print with matte PLA, ABS and PETG without support. ABS needs raft but it came out beautifully. 

Gears Toy

Fidget Gears Stylish v2_Gear 1.stl

Larger container for things/pills etc. 83mm long.
Print without support or just for the cap top area. Parts aligned for printing.


Container v3.1 update

Container v3.1

Container v3.1 seal.stl

Container v3.1 cap.stl

This one is similar to my previous posted model but doubled at height.

Print normal without support. Models are aligned to print-bed, use brim or raft if needed.

Long Container for Keychain 

Keychain Container v2.8 Long.stl

Simple but efficient clip to hold the filament spool. 
The arrow shows the direction for inserting the filament. It made for 1.75 mm and holds tight. 

Filament Spool Clip

Small container for pills or small things.

Small container for keychain

Keychain Container v2.stl

AirTag housing for keychain
easy print no support
[v2.62] Rounded edges; Reduced overall material and height.

AirTag Keychain v2.62

AirTag housing for keychain
easy print no support

AirTag Keychain v2.5 

3D Design and Maker Hobbyist 
email: yuval@258.co.il


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

yoovee