Gone are the days of using paints and tapes to personalize your AT2040 microphone. No longer do you need to contact Audio-Technica to replace your mounting ring if broken. I present to you a replica of the original. This item can be used to give a nice pop of color to the matte black exterior of your stream mic, color code your co-host's microphones for your podcast, or even make your microphone a little more personal!

When printed in solid PLA, it retains enough spring to function almost exactly as the original. This part may require some mild post-processing. 

Installs exactly as the original.

Audio-Technica AT2040 Mounting Ring

Recently as the result of a freak accident, the knob to my Brondell Swash Ecoseat broke. In a rush, I quickly printed off the first and only knob I found and used that temporarily. Alas, I found myself dissatisfied with the feel of the imposter knob and attempted to repair the old one. With that not working, I investigated the construction of the original, discovering that it was simply a metal ring glued to a plastic core with a sticker on top. So with some heat and gentle persuasion, I removed the metal ring, measured every inch of the plastic core, and made the copy I now present to you here. 

**instructions on regaining the familiar feel of the old knob are as follows:**
1. Remove the sticker from the face of the original (carefully, as the backing holds the color).
2. Remove the metal ring from the original plastic core. 
3. Print the clone core.
4. Replace the sticker, then the metal ring.
5. Affix to your toilet and return to civilized life.

Brondell Swash Ecoseat S101 Knob Core

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

xilehorizon

Audio-Technica AT2040 Mounting Ring

Brondell Swash Ecoseat S101 Knob Core