video of my print with these files - https://youtu.be/quvNsO3Y03Y edit: notes : i have remodeled the "default files" it should print nicely now, sorry for any inconveniences i made this in onshape, can be found on there searching for "azureusflames". Masterball - this one snaps close, hinge has a 3.3mm hole, it is about 56mm wide in diameter, looks really close to the real thing. The model comes with different parts so it requires assembly and additional things not included ( glue of choice, i used Loctite superglue and a pin for the hinge, i used "uxcell 50Pcs 3mm x 18mm Dowel Pin 304 Stainless Steel Shelf Pegs Support Shelves Silver Tone" from amazon) i have other balls in the making that reuse all the model files except the top half.

• "reusable" = reusable with my other models so don't need to redownload if you already have

this one comes in 2 different ball styles, one with a raised "M" no body imprint ( calling this one "alternate" and one that sits almost if not flush with the ball "default", the image displays a default print

files required to make the ball

1. bottom half (reusable)
2. top ring (reusable)
3. bottom ring (reusable)
4. button (reusable)
5. Left and Right pink sides
6. pick DEFAULT or ALTERNATE

• default M
• default Top half
• Alternate M
• Alternate Top half