Superman-02.stl

Hulk-01.stl

Batman-02.stl

Batman-01.stl

Thundercats-02.stl

Drone Master Helm from Helldivers. 2 Parts Scale to your Fit (I went 20000%)
Not tested on a actual print yet. this is my first test at splitting a part and adding some thickness. My guess is it will have some trouble fitting we shall see. Also Poly is sort of Low working on bringing High Quality models for free :)

Drone Helm- HellDivers

Drone Helm-Front.stl

New Version. Stronger Counter Spring. New Designs Coming soon

update 5/22/24- printed well with minimal stringing. Much stronger bite. The Handles are a bit too weak they fold over on them selves a bit too much.

ChipClip-TPU-V4

ChipClip-TPU v10.stl

A clip for your Chips ... or other snacks. I'd suggest printing with TPU but any semi-flexible filament should work. 

This design was inspired by https://www.thingiverse.com/thing:1212828/files

 This is my second attempt first, the one did not work :/ Beefed up the back spring and added a counter spring. Working on a third design with my nephew (9yrs) to improve the spring  and show him how designs can be improved and from version to version

ChipClip-TPU v3.stl

A crown I made this for friends kids Baseball Team. they get to wear it if they hit a homerun while they run the bases. I Scaled it wrong When I brought it into Blender to stretch the crown into more of an ellipse to fit the head better. So just Scale in the Slicer 1000% and it will make the narrower side of the ellipse just about 6.5 in. I printed in Both PLA and TPU.  The overhanging arches Didn't do great without supports or possibly better settings. But its for some teens that are gonna toss it around in a dugout STEP files and OBJ added. hope to see some cool remixes 

Crown-Lions2024.stl

Mushroom1 v1.stl

Updated version created from the Parametric box cylinder is 36mm x50mm. added old model for reference. https://www.thingiverse.com/thing:4757317. Thank you to thesamenametwice for the original file. 

Lupe Box

Bottom-Lupe.stl

I got tired of my Tissues always slipping away when I made a turn. So I fixed it :P. This will fit your standard box of tissues. This is meant to sit on the floor and bite into the carpet of your car 

Truck-Tissue-Holder v1.stl

I got tired of my Tissues always slipping away when I made a turn. So I fixed it :P. This will fit your standard box of tissues. This is meant to sit on the floor and bite into the carpet 

A case for your Vaccine Card. Use a Clear Filament. I used Inland PETG the model it set for 2 layers thick for the screen you could make it 1 by dropping the model .2 on the z axis

Vaccine Card Case

Base.stl

Spool holder

Frame-REV-1.stl

one of my first designs from scratch. should fit any v slot rail fit real nice on my ender 3 pro. In retrospect I should have flipped the holes 180 deg and wouldn't need supports.
also after printing I think I could have made the tear drop a little lighter. might not have needed one at all.

Filament_guide_arm_v2.stl

filament_guide_wheel_v2.stl

PIN-1.STL

PIN-2.STL

Filament_guide_end_cap_v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

xRONINx6

Achievements

Seedling

Debutant

Explorer