This is designed to work with the 30mm SMD cut tape reels from here: https://www.thingiverse.com/thing:4735881

Gridfinity SMD Cut Tape Holder for SMD parts

Gridfinity SMD Cut Tape Holder 1x6x0.5.stl

Gridfinity 2x2 holder for sticky notes! I was surprised to find out that post-its fit perfectly inside the 2x2 footprint. This bin fits sticky notes of the standard 3" size (which is just under 77mm).

Prints with no supports, works with all your other Gridfinity stuff!

Gridfinity Post-It Sticky Note Holder

Gridfinity - Post-It Holder.stl

This thang is for holding an Arduino Mega / Mega 2560 / Keyes MEGA 2560 Plus - or anything else compatible with that footprint - along with a 400 point breadboard such as the BusBoard BB400 or similar.

It should also fit an Arduino UNO!

The board should friction fit onto the pegs, and you should use your breadboard's sticky back to adhere it to the part.

The station is designed for a 400 point breadboard, but there's no reason you couldn't stick any size of breadboard on there really!

Make sure your bed adhesion is good because this is a relatively large, flat print.

Here is the OnShape document for you to fork and tweak to your heart's content: https://cad.onshape.com/documents/52b234af72c770f4b449169c/w/b143c167bf3ae721f87ee0c5/e/af362b0c3621b749cd6c909c

Arduino Mega/2560 Breadboarding Station

This thang is for holding an Arduino Mega / Mega 2560 / Keyes MEGA 2560 Plus - or anything else compatible with that footprint - along with a 400 point breadboard such as the BusBoard BB400 or similar.

It should also fit an Arduino UNO!

The board should friction fit onto the pegs, and you should use your breadboard's sticky back to adhere it to the part.

The station is designed for a 400 point breadboard, but there's no reason you couldn't stick any size of breadboard on there really!

Make sure your bed adhesion is good because this is a relatively large, flat print.

Here is the OnShape document for you to fork and tweak to your heart's content.

Holds 4 solderless breadboards vertically for fast grabification. It is 2x2x6 gridfinity units in size.

Based on Gridfinity system by Zack Freedman

Gridfinity Vertical Breadboard Holder

Holds your laptop vertically. There are several different models in this collection, with different "hole widths" to accommodate different width laptops.

The OnShape model is here: https://cad.onshape.com/documents/971568c20b50b76203eb46c6/w/87d87de789ce783ca75b4b4f/e/b20464fa498ee45759d559d7?renderMode=0&uiState=644672c8a66cb45236c4ee76

You can edit the width in the topmost "Construction" sketch to change to a custom width.

Vertical Laptop Stand

Vertical Laptop Stand 18mm.stl

I just wanted space for Post-Its, some pens, and a few other odds and ends that were cluttering my desk

Desk Organizer

Need a place for your various lengths of wire?? I did, so I made this.

Created using the excellent https://github.com/kennetek/gridfinity-rebuilt-openscad

Gridfinity concept by Zack Freedman

Gridfinity Breadboard Wire Holder

2x2 Breadboard Wire Holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

willdavidwarren

Achievements

Seedling

Up and Coming

Trailblazer