If the rubber grommet in your Boss guitar pedal self destructs like mine did, here's a replacement. 

There are 2 versions:
- One is faithful to the original rubber grommet's design, with an overhang that will probably require support.

- The other is a more printable version with a chamfer on the overhang. I prefer this one!

Print in flexible TPU.

Boss Guitar Pedal Grommet

Boss Pedal Grommet.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2878874.

Base foot pad to stop the tool holder's metal edges from scraping up the surface of your desk. TPU or other flexible filament recommended.

Base Foot for RC Tools RCT-SS001 Screwdriver Rack Tool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2978162.

Here's a new mount remixed from my jello proof session mount: https://www.thingiverse.com/thing:2940809

Gets rid of the floating arm supports and mounts the cam straight to the plate. Cuts weight if you have a jello free tune, and gives an extra 15mm for the top plate vs. 10mm in the jello-free version.

Session Mount Slid Forward - Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2901151.

Tower endcap for Micromake D1 printer, with a hollowed out section to fit.

- 8mm clearance for the top of the rail, z-stop wires, and belt tension screw.
- Access hole for belt tension screw
- Bolts onto frame with 4x 8mm M3 socket head bolts + M3 T-nuts.

Delta Tower Endcap (2020 extrusion)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3067414.

2 piece minimalist mount + lens bumper for a GoPro Hero 6 Black on an Armattan Rooster. 

Maintains stock 35deg camera tilt. 

Front screws stay accessible with notched cutouts in the bottom plate.


WHAT'S ON THE MENU
One lens bumper to rule them all, included. Features some serious top corner protection with a shoulder that keeps it from sliding back in a crash.


THE MOUNTS themselves have some variety, depending on what you're after:

The Original is lightest weight / least material. 
Better suited for long range where you're not whipping the Gopro around. I haven't broken the front strap yet flying acro, but I've thrown the camera in a few crashes. **This version is also 1mm taller than the others (45mm, the rest are 44)

v2 - 
Adds reinforcements around the LCD panel and top button, along with 1mm shorter overall height. 
The extra connect points add structure, grip, and protection while preserving the profile lines of the frame.

v3 - 
Includes a cover for the front LCD. 
The Gopro has voice control, right? We don't need no LCDs.

v4 - <<-- This one's my favorite
Has more structure between the front LCD and power button guards. 
Less flex in the skinny LCD and button guards. 

v5 - 
Adds mega top corner protection. 
Also the heaviest, and covers the small red status LED. 
Life is full of tradeoffs.

v5.1 - 
Same famous protection of the v5, now with a roomier fit. 
Increased GoPro height from 44mm to 45mm.

Armattan Rooster - GoPro Mount + Lens Bumper (Hero 6 Black)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3437075.

Small/single size storage bins, designed to fit:
Stanley 014725 25-Removable Compartment Professional Organizer

Each container prints as 2 parts: bin and base. Prints with no support!

Included:
- Single bin (full size)
- Single bin (split width)
- Single bin (split length)
- Universal base with 4 corner pegs

Regular: 1.2mm thick sides
Heavy duty: 1.5mm sides

After printing, rough up the surfaces and glue them together with E6000 or Welder silicone adhesive.



Stanley Organizer - Small Bins (2 part print)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2888859.

Inspired by https://www.thingiverse.com/thing:2764912 but modeled from scratch

The Runcam Micro Swift 3 is longer and wider than some other micro cams. 

My camera was poking out the front of the cage with the other mount, and wedged in there horizontally. This mount tucks the camera back and trims 0.5mm from the thicker section (for 1.0mm total).

Designed for the Armattan Rooster 5" quad frame.

Runcam Micro Swift 3 Camera Mount - Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4009709.

Canopy for the TBS Oblivion fpv drone frame, without the camera hole.

Remixed from https://www.thingiverse.com/thing:3778176 



TBS Oblivion Canopy - Camera Hole Delete

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2991814.

The original micro cam mount was flexing and vibrating midflight. This remix 
- adds 4mm width to the clamp section 
- adds 4mm width to the camera arms
- heavier fillets between the sections

Feb 29 2019: 
- Added version for 22mm wide mini FPV cameras.


Fatter TBS Oblivion Micro + Mini Cam Mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4790382.

Small bin for Stanley organizer, with a diagonal split that doubles your storage for small components.

This design is 1mm taller than the original, to create a tighter seal against the lid. IMO this is what the original height should have been.

The bottom corner pegs print separately and glue into place. 

No supports needed.


Based on my previous model: https://www.thingiverse.com/thing:3437075

Stanley Organizer - Small Bin with Diagonal Split

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4178937.

Canopy for the Hyperbaby 3" fpv drone frame bottomplate. Mounts on 30mm standoffs. 

Fits 20x20 stacks that don't stick out past the outside edge of the 30.5x30.5 standoffs.

Hyperbaby 3" Canopy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2978167.

Add some armor and vibration dampening to your GoPro Hero 6 Black. 

Designed to fit the HD camera plate of the Armattan Rooster drone frame.

See also: 
Jello-proof Session Mount for Armattan Rooster - https://www.thingiverse.com/thing:2940809

6/26/18: Added cutout for top button

Jello-proof GoPro Hero 6 Black Mount - Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4795850.

Half size bins for Stanley Small Parts Organizers. Double your storage!

Diagonally split for easier access and ability to hold larger parts.


See the original *full size* small bin with a diagonal split: 
https://www.thingiverse.com/thing:4790382

Stanley Organizer - Half Size Small Bin - Diagonal Split

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4009745.

30mm tall foot for a kossel/delta printer with 2040 aluminum corners. (https://www.robotdigg.com/product/555/2040-or-3030-Alu-Vertex-for-Kossel-XXL-or-XXXL)

Requires 2x M5 12mm flat head cap screws and 2x M5 T nuts.

I recommend printing in TPU with ~2mm walls and ~40% infill for a balance of vibration dampening and strength.



2040 Delta Corner Foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2876307.

Front bumper mount for Armattan Rooster.

Includes a spot to run a zip tie to strap down the front end of the camera.


If you're running a micro cam: 
Runcam Swift 3 Micro mount for the Rooster: https://www.thingiverse.com/thing:2888859

Front Bumper w/ Camera Tiedown - Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2932418.

GoPro Session mount for a QAV-SKITZO Dark Matter fpv quadcopter frame. 

v2: Moved shoulders 1+1mm inward to fit tighter on the rounded corners of the camera.

QAV-SKITZO Dark Matter GoPro Session Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2994068.

AXII pigtail antenna mount for the Armattan Rooster. Antenna stays very protected, flat out the back so the carbon and lipo don't block the axii's broadcast pattern.

Includes 2 holes for forever tubes for your rx antennae. 

Print with TPU, 0.1-0.2mm

AXII Tail - Antenna Mount - Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3044885.

Designed for 5mm arms on a delta printer, to mount dampener springs between the arms. 
Eliminates backlash and chatter from the balljoints.

Includes a notch to keep the spring loop in place and to prevent creaking from the springs.

Print 12 of these for a full set of 6 springs.

Print in PETG for best results! 








5mm Delta Arm Spring Dampener Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2940809.

Anti jello GoPro Session mount for the Armattan Rooster.

Moves the Session about 10mm forward to provide more room for the battery.

Print with supports, on its side.
20% infill, 0.8mm walls to provide some air cushioning and save weight on the corners.
Enable alternating extra wall layer for better adhesion between walls and infill.

v2 uploaded 2018-06-05: Thickened arms, and moved rear attach point lower on the cube to keep the camera from bobbling around during aggressive flying.

Jello-proof Session Mount for Armattan Rooster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2874375.

Arm guards for running motor wires to a 4in1 ESC on Armattan Rooster 5" frame.
Fits 3x 18AWG

Arc cutout goes on motor side

Two ziptie slots positioned so as not to interfere with a 3M foam pad

Armattan Rooster Motor Wire Guard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4706112.

J-Head U Bracket for an E3D v6 hotend.

J-Head U Bracket for e3d v6 heatsink hotend

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2888988.

Armored cap to protect the soldered leads of a Panasonic 1000uf 35v low ESR electrolytic capacitor. 

Includes a 5mm stop inside to keep from pushing it on too far and crushing the leads

Interior rib clicks into place on the depression on the capacitor.

Walls are 0.85mm thick. 

Capacitor Armor - 1000uf 35v LowESR Panasonic 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3374618.

Designed for a KISS 32amp ESC. Should work fine on 24a, etc.

Lightweight design. Protects just the leading edge where a propstrike would occur.

Includes a cutout for the status LED.


I recommend printing in flexible TPU. PETG could work too, but might shatter on a good enough hit. 

With a heated bed, it prints fine standing up on the chamfered edge.

KISS 32a ESC protector w/ LED cutout

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3220796.

Basic Axii (full size) antenna mount for the Armattan Gecko 3" quadcopter frame.

Bolts or zipties onto the rear holes on the top plate. 



Armattan Gecko Axii Mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

westendriot