MiSTer FPGA Case V2

Integrated DE-10, I/O Board and USB Board into single case. All sides of the case are printed flat to create clean surfaces.

I'm using M3x16 cap head screws on the top. These are the board layers and hardware in order from top to bottom:
M3x16 cap screw
IO Board
M3x14mm male/female brass spacer
DE-10 Nano Board
M3x14mm male/female brass spacer
USB board
M3 nut or M3x8 female/female brass spacer to which I add the silicone covers the DE-10 came with.

UPDATE:

    Added the Audio Port to the USB Side Wall.
    Added Side plates for USB v2.1, Side with larger SoG switch opening and Longer Buttons with more clearance.
    Light Pipes ID has been increased to Dia 5.6mm. Ensure your printer is tuned and not overextruding resulting in ID falling short. Optionally a 5.5mm drill can also be used to clean any extrusion start seams in the ID to better fit over the LED

UPDATE: 1/16/2022 - Added Digital I/O v1.2 Ports

Print Settings

Rafts:
Doesn't Matter

Supports:
Doesn't Matter

Resolution:
.2

Notes:

Print in PLA

MiSTer FPGA Case V2

MiSTer_Case_V2 - Upper - Dia5.6mm Light Pipes & Longer Buttons with Clearance (Analog IO).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

viperman3

MiSTer FPGA Case V2