Use this grenade against anybody who wants to be your enemy

**Features**
- It opens
- It has a timer
- It is screen accurate (does not explode)

**Other Parts**
- Egg timer
- Hinge
- Magnets (3/16" diameter, 1/8" thick)

**Instructions**

1. Print one of everything
Take apart the egg timer. Screw the Timer Connector onto the bottom of the mechanism. Glue the Hub Connector to the top.
2. Screw the hinge onto the side of the Bottom Part and the Middle Ring.
3. Glue the magnets into the holes on the Bottom Part and Middle Ring.
4. For the pin in the knob, cut a piece of 1.75 mm filament or a paperclip or something.
5. Hot glue everything else together. I think it's pretty obvious where things go.
6. Throw it at your enemies and/or friends.

Mouser (P̵o̵w̵d̵e̵r̵ Jinx's grenade from Arcane) 

Bottom Part.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4927469.

BbbrrrrrRRRRrrrrrRRRRRrrrrrrrRRRRRrrrrrr!

Flying Benchy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1879251.

Replacement air conditioner knob for a 1999 Chrylser Sebring. This is a dual extrusion print. We used an Ultimaker 3. Inside should be some translucent material, like PET. Outside should be ABS.

[Design on Onshape](https://cad.onshape.com/documents/49cba0fe9f7dc3579e1fba0c/w/49a98be03b0560cd234a4ac4/e/54cceefa0dde438dec194768)

Made by [MatterHackers](http://www.matterhackers.com/).

1999 Chrysler Sebring AC Temperature Knob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1879309.

Hang your nerf gun on the wall.

[Onshape Design](https://cad.onshape.com/documents/896047fce5fcd21279a312b9/w/ed12976c0686fa76dd462be2/e/d99bfd62f4c029bb14a50341)

Made by [MatterHackers](http://www.matterhackers.com/).

Nerf Lawbringer Wall Rack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1279646.

The Left side Y Axis carriage for a Solidoodle Workbench Apprentice. Probably works for the regular Workbench as well. Reverse engineered from the stock design.

Solidoodle Workbench Apprentice Left Y Axis Carriage

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3677637.

This is a remix of the [Nerf Kronos trigger by beardland](https://www.thingiverse.com/thing:3093206). It has been split in half to make it easier to print, and also some aesthetic holes were added so it more closely matches the original trigger.

[Design on Onshape](https://cad.onshape.com/documents/4d8426407ae2d31820246da7/w/77378a142e345b851bccb98d/e/e798573c6ea162308211c221)

Nerf Kronos Trigger - Split

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:93195.

Holds 3 standard Radio Shack wire spools (1" inner diameter) onto a pegboard.

Pegboard Wire Spool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1530632.

An airplane propeller prop for your AC vents.

Dashboard Propeller

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3677660.

This is a front plate for a Nerf Kronos designed to be printed in two colors. It also has room for a 6 shot follower. You can either use a dual extrusion printer or print it in two separate pieces and glue it together.

You will also need the Front Plate Rear Portion from [CyanAce's original design](https://www.thingiverse.com/thing:2938102/).

This is a remix of [garguncle's front plate](https://www.thingiverse.com/thing:3517013), which is in turn a remix of [CyanAce's front plates](https://www.thingiverse.com/thing:2938102).

Nerf Kronos Dual Color Front Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1894684.

*Do not actually use for salsa.

[Onshape design](https://cad.onshape.com/documents/0d6bc0ab5c91a5ed186f7fc2/w/c81fb74eade940c7eeacc4f7/e/406ce5c22fd3a9302b81d109)

Salsa Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2467189.

Print two of these. One goes on top, one goes on bottom.

[Design on Onshape](https://cad.onshape.com/documents/35acec662a3f5636271bcde7/w/24ec5685081ea10fb8c7781e/e/94a9956afe9b171510cc41f6)

DyzeXtruder GT Mount for OpenBeam Kossel Pro

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

unlimitedbacon