DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
profile hero image
uhdenes’s profile picture

uhdenes

0 followers0 downloads

Achievements

First Make published badge
Novice Maker
First Make published
All
Sort by:

Wavey Loop Wall Sculpture

Wavey Loop Wall Sculpture - Wow, what an incredible design, Herschel! Thank you so much for sharing this. I fell in love with the model and decided to go all-in on the post-processing. It took me about 3 months of patient work, and I couldn't be happier with the result see attached images. Here are some specs and my process for this build: - Material: Printed at 100% scale using ~4kg of Sunlu PLA+ Black (approx. 230 hours of print time). - Prep: Rough sanding with 320-grit, then coated all surfaces with Sunlu Standard Gray Resin and cured it under UV light to fill the print lines. Followed up with fine sanding using 600-grit. - Paint: Degreased and primed with 2 coats of Dupli-Color Universal Primer (Red). The main color is Dupli-Color Platinum RAL 3020 (Traffic Red). - Finish: Added Montana Glitter Spray (Silver) for that extra pop, and sealed everything with Kwasny SprayMax 2K Clear Coat for ultimate protection and shine. - Hardware & Stability: Swapped the 135 self-tapping screws for M3x18 screws. To ensure structural stability, I had a custom backing plate made and attached it to the rear. The final piece weighs in at a massive 7kg. It was a lot of work, but worth every single second! Thanks again for this masterpiece. - 3d model