Round bowtie connector, 3/4" thick, with 1/8" cap and holes for #6 flatheads

p1747-RoundBowtie0.5-THL-1001_holes.stl

French cleats, 7.5-inch x 3-inch, hollow, with bowtie connector

p1878.stl

WSTYPE-4114-H1.5FFS French cleat with hatomic back and #6-32 threaded holes (p186x)

p1869.stl

6-inch French cleat-mountable multi-hook

p1872-Hook3.stl

p1123-TwoByTwoEndJig-v1.0.stl

A piece to clamp onto the end of a two-by-two with 1/2"-spaced holes for #6 screws to connect to a [drill guide](https://thangs.com/designer/togos00/3d-model/p1011-DrillBitBushingJig-v1.2.stl-905363) or anything else you might want.

p1011-DrillBitBushingJig-v1.2.stl

Designed to hold a 1/2" OD x 1+1/2" aluminum bushing (I use https://www.thingiverse.com/thing:6124290) perpendicular to a surface to be drilled into.  1/2"-spaced holes for #6 screws allow it to be bolted directly to the workpiece, or to another jig piece.

The OpenSCAD design has parameters for inner and outer diameter, so can be customized to other bushings or for use without a bushing.

TOGRack Gridfinity Baseplate v1.2 3x2

5"-wide [TOGRack](http://www.nuke24.net/docs/2018/TOGRack.html) panel that is a 3x2 Gridfinity baseplate.  Use flathead #6 screws to attach it to your TOGRack.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

togos00

Achievements

Seedling