Looking for a fun way to show appreciation to the wonderful castmembers? We've designed these “Challenge Coins” as a fun way to express our gratitude to our favorite cast members at every park. Featuring the memorable designs of out favorite park locations, these can be printed in a single color or painted to REALLY make them pop and feel personal.

These are designed to be given as gifts, not to be sold. Please share the love and give these away to anyone spreading the magic - castmembers or group meetups alike!

Castmember Challenge Coin gifts - Epcot

CC_EPC.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6037176.

A themed case for ProxMark 3 Easy boards. With the release of the Wayfinder, many crystal makers are shuffling to be compatible. This case protects your board while having a universe friendly look. 

The print ready files are presliced for a Bambu X1Carbon with AMS. I print mine with black and then detail in Iridium gold. All other printers should use the file named PM3 vTC.3mf

I've also included the F3z file. 

ProxMark3Easy Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5625462.

I realize this is ridiculous. This was just a fun project to make something for my 6" figures. The scale is all off so I decided to bore it out to hold a crystal. If this is something you like, enjoy!

Kyber Crystal - Throne Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5625373.

This model is for a minimalistic Kyber stand. A simple shape that fits one single kyber. This print works well with both FDM and SLA printers though resin does capture some of the angles much better. 

Kyber Crystal - Modern, Slim Stand

A stand for kyber crystals. This is designed so the crystal is suspended between the two points. Custom crystals often have shimmer or translucent aspects that can be lost with an enclosed case. 

This stand is designed to let light reach your crystal. You can add a backlight so that your crystal is fully illuminated if you wish. Simply glue the rear panel on and you're good to go.

Crystal Bridge stand

A stand for kyber crystals. This is designed so the crystal is suspended between the two points. You can add a backlight so that your crystal is fully illuminated if you wish. Simply glue the rear panel on and you're good to go. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5194276.

This is a simple stand designed for holding small models - in our case - split body kyber crystals. This is a simple print and completes in under an hour. The pegs are just offset to the main body and are half the diameter of the peg holes. You can either double up the pegs or save a few as spare and use them in half. 

A small dab of super glue will hole them in place. Allow to cure and they are plenty strong to hold items while painting. Printed at 5% infill and designed to use minimal motion and filament assuming you orient properly. 

Kyber Crystal - Model Paint Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5188767.

This is designed for creating kyber crystal molds. Place the push pin into the cylinder hold. Apply tape to the base of the cylinder. This will be you point to hold the crystal. Using a small bit of sticky tack, you can adhere the crystal to this point and then pour in your silicone. When the silicone is cured, use the push pin to break the suction and slowly release the cured silicone model from the cylinder. 

The benefit of this is that the push pin creates a channel to your primary pouring point. You will have an easier path to pour your resin which then becomes an easier way to remove your new, custom crystal from the mold. 

While we no longer use this in our operations, this was a huge help in our early days. We offer this to the community in the hopes of inspiring and assisting young makers. 

Kyber Crystal Mold Assistant

We wanted to give something back to the Kyber collecting community. One thing collectors struggle with is how to best show off their crystals AND the info card. This model is an easy fix to both those issues. Scaled for a quick print, just over an hour. Fits custom and original crystals from Galaxy's Edge. Modeled around and tested to also work with our custom designs at Tinkerers' Cove.

Free to use for personal display or gifts. Not to be remixed or sold. Enjoy and may The Force be with you all!

Kyber Crystal Ring Stand Display with Card Slot

Kyber Crystal Ring Stand with Card Slot

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

tinkererscove

Achievements

Seedling