a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

will need a uhhh screw i forgot which one i used. i think it's like the normal flipper ones but maybe a little longer. also a small washer. assembly the same as a flipper. print both right way up you know the drill

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

Hextraction DC Flipper

DC switch base v2.stl

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

kind of looks like the peeper from subnautica. didn't set out to make this but was a cool byproduct of experimentation. uni printer is currently broken so no idea how this behaves! good luck! (if u do this please send a video i would love to see lmfao)

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

Hextraction Peeper Tile

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

will need 2 m3 screws and a small rubber band. works way better than i thought it would, randomises between the three outputs very well.

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

Hextraction Trampoline Tile

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

**made in collaboration with guonuoTW! thanks to them for idea, photos and testing!**

a modified version of my [plateau tile](https://than.gs/m/878535)

you know like those things in marble runs that make the ball spin around? that's what this is supposed to do. three possible exits

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

Hextraction Vortex Tile

!!! NOT TEST-PRINTED, ONLY TESTED IN A VIRTUAL ENVIRONMENT !!!
it works in virtual environment but real life is weird

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

you know like those things in marble runs that make the ball spin around? that's what this is supposed to do. three possible exits

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

do not print these what are you even thinking

Hextraction Cursed Collection

all of them.stl

go [here](https://thangs.com/designer/johnlattanzio98/3d-model/Remix%20of%20Hextraction%20Secret%20Tiles-878686) for a fixed version of the rest, the lil DC tile should be correct tho

Fixed Hextraction Secret Flipper Tile

Fixed Secret Flipper Body.stl

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

**will need a well-tuned printer!!!!**

[random](https://gitlab.com/ransElectronics)'s idea (join the hextraction discord. NOW)

if you attach the lego to the tile before putting it in the pool, it can be freely altered by whoever draws it due to the rule section 2, 2.4

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)


Hextraction Lego Tile

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

**will need a well-tuned printer!!!!**

[random](https://gitlab.com/ransElectronics)'s idea (join the hextraction discord. NOW)

if you attach the lego to the tile before putting it in the pool, it can be freely altered by whoever draws it due to [this](https://www.playhextraction.com/tedious-rules#:~:text=If%20the%20tile%20has%20moving%20elements%2C%20unless%20its%20rules%20state%20otherwise%2C%20the%20player%20can%20position%20them%20any%20way%20they%20want%20before%20or%20immediately%20after%20installing%20the%20tile.) rule

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)


a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

this tile counters the 30 degree incline to make a flat plateau for your balls to rest. do not think about that sentence too hard. they might get shot down one of the three tubes, they might just kinda sit there until another ball comes around to hit it off. will be the biggest tile in your collection by far. a real weird one!

included are two separate middle pegs because i'm indecisive so you have to choose **(tested with the cylinder, works well) **

thanks so much to guonuoTW for the photo and for testing!!

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)


Hextraction Plateau Tile

plateau cylinder v4.stl

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

this is an effects-less version of my [hop tile](https://than.gs/m/875597)

probably has funny properties!! idk

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)


Hextraction Tree Tile

tree tile.stl

a tile for zack freedman's [hextraction](https://www.playhextraction.com/)!!

a purely physics-based newton's cradle-like contraption! if there is a ball trapped in one side, a ball from the other will knock it free! (most of the time. fun variation!) if a ball is already in the side that another one comes down, it slips past, like a trap tile!

thanks so much to [@theethetree](https://thangs.com/designer/theethetree) for testing & for the photo!!

if u any questions/feedback/cool photos, send them to me on discord!! search for my username in the voidstar lab server :)

Hextraction Newton's Cradle

hextraction newton's cradle

!!!! THIS HAS NOT BEEN TEST-PRINTED YET. PRINT AT OWN RISK !!!!

you know the immediate pachinko play we all know and love? what if there was two times the pachinko. what then. think about it. that's right.

(from built for two page) print one top, one bottom, and two links. use M2x8 screws to connect it up. it'll be a very loose fit - this is important to make it fit all kinds of boards.

(from pachinko page) after printing, wedge some small pieces of filament into the holes to make the pegs. if the holes come out too small, touch up with a 2mm drill. you can also use M2 screws.

this is mostly just a smashing together of [@ZachFreedman](https://thangs.com/designer/ZackFreedman)'s [Built For Two](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Tile%20Built%20for%20Two-856464) tile and his [Pachinko Tile](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Pachinko%20Tile-837138). thanks to him for those, and for [hextraction](https://www.playhextraction.com/) as a whole!

feel free to send any questions/feedback to me on discord! i'm in voidstar lab, just search my name

Hextraction Dual Pachinko Tile(s)

Dual Pachinko Tiles DO NOT PRINT.stl

Dual Pachinko Top v5.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

timothyjackman

Achievements

Seedling

Trailblazer

Fan Favorite

Pinned models

Hextraction Newton's Cradle

Hextraction Vortex Tile

Hextraction Trampoline Tile

Hextraction DC Flipper

Hextraction Peeper Tile

Hextraction Trampoline Tile

Hextraction Vortex Tile

Hextraction Cursed Collection

Fixed Hextraction Secret Flipper Tile

Hextraction Lego Tile

Hextraction Plateau Tile

Hextraction Tree Tile

Hextraction Newton's Cradle

Hextraction Dual Pachinko Tile(s)