A large plant pot, 200mm diameter and 170mm height.

To print, you will have to set the top layers and infill to zero. I suggest using between 3 and 5 perimeters and bottom layers depending on the strength you need.

A short of the the final print https://youtu.be/xY5UtUlTFi4

gladis.stl

A large plant pot, 200mm diameter and 170mm height.

To print, you will have to set the top layers and infill to zero. I suggest using between 3 and 5 perimeters and bottom layers depending on the strength you need.

The "Florence" plant pot / planter is 7cm in diameter and 6cm in height.

The design is a solid shape, giving more freedom for wall thickness when it comes to printing, and must be printed with zero infill and zero top layers.

I recommend printing it with 3 perimeters, and 5 bottom layers. This gives a fairly strong finished product.

You have my permission to print and sell this design, I only ask that you make clear the design is not yours, and give attribution. If you are fortunate enough to make some money from it, I would really appreciate it if you bought me a coffee https://ko-fi.com/thudbuzz

Most of all, I hope this design brings a smile to some faces, happy printing!

Succulent Plant Pot / Planter "Arnold"

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like